I built a Capacitor in Vertical form (tolerance, value, voltage,.. are aligned), as a result of rotating this cap in shematic to Horizontal the tolerance text, value texts,.. are not aligned. Any suggestions to deal with this issue ?
When u aligning the cap from vertical to horizontal, the grid placement is been get changed.Due to gird change the alignment is been get changed.
Thanks & Regards,
PCB Design Engineer.
Engineer PCB Design.
In reply to oldmouldy:
Hi Dhamodharann, oldmouldy.
Thanks for your comments.
I haven't got you mean on "create a "convert view"" , does it mean that i place a part created in vertical to Shematic then rotate it to Horizontal and realign property text then i have 2 symbols with texts aligned ?
I had known the function ALT_SYMBOL in Layout, now i would concern whether it available in Schematic or not.
Another question i would address is that how to setup reading orientation for properties text ?. In my current schematic it offsets to part orientation. Whilest schemtic reference, it offsets to datum coordinate, no matter how part orienation is, text is still in 1 way reading (upper to lower, left to right).
I am new to Allegro from Pads that my terms may not suitalbe to yours.
In reply to phandinh1508:
Oops. i got it :) , thanks oldmouldy.
Can you help me more on "properties reading orientation" above ?