I am trying to interlinkCAM350 with Allegro PCB editor.
While enabling Cross Probe Allegro in CAM350 its giving message as "start Allegro and the DstCAM350() script. "
can anybody tell me about this script file and the procedure to interlink these tools?
Part of the CAM350 has a skill file dstcxi.il which is a skill file to enable the link. Normally when you insatll CAM350 a line is written to your allegro.ilinit file that enables this when you start Allegro. Check to make sure that you have the following as part of your $HOME\pcbenv\allegro.ilinit file.
; DstCAM350() is the CAM350 Cross Probe Startup
load( "C:/DownStreamTech/CAM350 10.7/DstCxi.il")
In reply to steve:
Thanks steve..that ws really helpful.
I have chcked with my $HOME\pcbenv\allegro.ilinit file but i was not able to find it.
nd is compatible with CAM350 10.0 ?
In reply to KavitaG:
a sample allegro.ilinit file is attached.
The path for the skill file just needs to match where it is stored on your PC.
while im trying to Interlinking Allegro with CAM350 im getting this kind of error "*Error* strcat: argument #1 should be either a string or a symbol (type template = "S") - nil"
can you please help me on this