I am using a simple IC circuit with no Voltage source just a dependent current source and 5 resistors, but I cannot get the simulator to show the Voltage, Current, and Power of each element(resistor) inside the IC circuit...I believe it is because there is no ground in the Circuit...(see the Options File for the Circuit)
The session log gave me
**** INCLUDING SCHEMATIC1.net ***** source EXAMPLE0000R_R7 N00567 N00506 360 TC=0,0 R_R8 N00567 N00506 90 TC=0,0 R_R9 N00567 N00506 120 TC=0,0 R_R10 N00567 N00558 200 TC=0,0 R_R11 N00558 N00506 160 TC=0,0 I_I1 N00567 N00506 DC .030
**** RESUMING bias.cir ****.END
ERROR(ORPSIM-15142): Node N00567 is floating
ERROR(ORPSIM-15142): Node N00506 is floating
ERROR(ORPSIM-15142): Node N00558 is floating
You need to have at least one reference node "0" in your circuit. You may want to make N00506 node as 0 or connect a very high value resistance say 100Meg between any node in your circuit and "0".