I am using dynamic fillet, disallow DRC and my fillets are not able to show on my differential pairs. Due to the physical constraint, the fillets are too close to the other trace of the pair. I can make the fillets appear by allowing DRC on my fillet parameters, but the DRC will show. How do I make the fillets appear without DRC or without waiving the DRCs?
You don't have to fillet the whole board with the same rules. but it's either All (Dynamic) or you can select by Window or pick net, pin. There is also a Pin property No_Fillet which would leave the pin without a fillet. You can then darw it in yourself so It doesn't produce a DRC. You can also tweak the size etc of the fillet from the Gloss - Parameters menu.