HI ALL,Will doing the layout in allegro without schematic is possible. Is by anyway Routing can be done without NETS and also without errors. how can it bring back to schematic. Thanks & Regardsshiva.
1. modify user preferences found in the "Setup" pulldown. - go to misc - add a check mark to ' logic_edit_enable'2. place parts on your board3. add connections - select the pull down menu "Logic" - pick "Net Logic" - create a netname under options in the control panelfyiI've only tested this with a netlist. Its woth a try.Good Luck,Oscar Miguelino
Oscar's method works for those preferring the 'blunt force' approach. It *always* ends up being better to start with the schematic and connecting to the board.