I need to transfer few mechanical parts from Capture CIS to Allegro Ex: Heatsink,Screws,Washers etc. As these doesn't have pins I am not able to transfer
Are you trying to just create a BOM from capture which is driven into Allegro or do these components have actual footprints which are going to be placed on the PCB ?We can place "labels" on the PCB which are driven from the front end where these labels have "No Pins"Need to understand what you are trying to achive ?
I need to create BOM as well as I need to place corresponding footprint.Also I would like to know about " labels with no pins "RegardsRMB
Hi !,You can get the mechanical parts from Capture CIS to Allegro if and only if the parts should have atleast one electrical pin in schematic part and .dra file.One more condition is the component should not be creted as a mechanical part,I mean it should be .psm file and .bsm file.You can assign pin nos for npth pad also.Could you try?regards,SATYAATS ECAD
Hi !,I mean it should be .psm file and but not .bsm file.regards,SATYAATS ECAD