thanks, how to setup so pin number can be displayed.
Go to color settings.
Switch on :Group=Geometry,Global visibility=Pin_Number.Enable Global visibility=Pin_Number.Regards,Satya
go to Group=GeometryUnder Package Geometry subclassEnable Pin_Number.Regards,Satya
i have tried in this way that you said, but pin number still visible.
i tried in the way that you said, but still be visible.attached file is the setting, plz check it. thanks really.
The text size for the PINs might be very small. Switch of the pins in dispaly visibility and check as the text might be under pins.
If the symbols were created prior to Allegro allowing the display in the board editor you will need to regenerate the symbols. You can try, as an experiment:o Save the design in a new directoryo dump libraries ( symbols, padstacks)o Open one of the symbols o recreate the symbolo reopen the board fileo refresh the symbol ( Place > Update symbols ; enable the part you recreated)You should then see the pin numbers on class PACKAGE GEOMETRYsubclass PIN_NUMBERIf this corrects the problem you will need to recreate your library symbols through a script or batch file.
sriramssr and Trykon,i have tried in this way, it is ok now.setup / drawing option / display / filled pads, if uncheck filled pads, pin number can be displayed.thus, Sriramssr said is right. pin number is too small, if closed filled pads, then pin number can be seen.thanks all of your help.allen from china.