Is there a way to "adopt" the path of a prior net to some other net name? I have a path that is connected most of the way as I would like but I want to that etch to be a different name.
First, delete the segments that connect to pins on the old net. Next, delete any Vias on the path as these will connect to your planes. Then, you can connect one end to your new pin, and working from that end replace the vias.Regards,Harold
Great! Will do and thanks for the help.Sandy
Probably the easiest way to reuse a trace on a dynamic shape, is to move the shape a known distance outside your board outline, connect the trace, then move the shape back.Regards,Harold