I am confused why this command
report_timing -max_paths 10 is reporting only 5 different paths each path repeated two times
Anybody has already known this reason
please help me.....
You are likely seeing a rising and falling path between each begin/end point or the path is going through different logicc. If you want each end point to be unique use -max_points.
In reply to wally1:
Is this a newly added command because I'm not able to use this command.
Error : A command argument did not match any of the acceptable command options. [TUI-64] [report timing]
: The argument in question is '-max_paths'.
: Check the command usage and correct the input to the command.
command used is : report timing -max_paths 5 > timing.rpt
Is there something to be added to the script to enable max_paths command. Does this command print only 1 path for a logic.
Thanks and regards
In reply to sruthikesh:
Looks from your error message you are using RC and not EDI/ETS/Tempus. The suported options there are indeed not identical
In reply to grasshopper:
yes it is RC and is there a similar option in RC to report only 1 path for a start and endpoint.