you know that there is now a cross sectional viewer button in the
analogLib mtline component edit properties/add instance form. The "Display Cross Section" button becomes visible when the Type of Input is set to Field Solver.
The issue is that when I click on "Display Cross Section" button the IC
6.15 tool displays "Starting Displaying" .... in the CIW but does not
display anything even after waiting for it to respond. What could be the
Which version of IC615 are you using?
This issue has been seen in the earlier version of IC615 and was fixed in IC615 ISR2.
Please refer to the following COS Solution -
In reply to Ashish Patni:
I am using IC18.104.22.168 . Please can you tell me exactly which version of hotfix should I download or do I need to download an updated base file to fix this ?
In reply to sohaiba:
Ashish already pointed out that this was fixed in ISR2. Since you can only load the latest hotfix (ISR12) from downloads.cadence.com (although a couple of previous ISRs are available if you pick the hotfixes in InstallScape) - but you might as well use the latest.
There is no "updated base file". The whole point of a Base release is that it stays static...