I have installed IC5141 in CENTOS 6.3, but there are some problems in
running IC5141. The startup speed of IC5141 is very slow. and when I
click the menu "library manager...", IC5141 hangs.
This is the log of CDS.
COPYRIGHT © 1992-2008 CADENCE DESIGN SYSTEMS INC. ALL RIGHTS RESERVED.
© 1992-2008 UNIX SYSTEMS Laboratories INC.,
Reproduced with permission.
This Cadence Design Systems program and online documentation are
proprietary/confidential information and may be disclosed/used only
as authorized in a license agreement controlling such use and disclosure.
RESTRICTED RIGHTS NOTICE (SHORT FORM)
Use/reproduction/disclosure is subject to restriction
set forth at FAR 1252.227-19 or its equivalent.
Program: @(#)$CDS: icfb.exe version 5.1.0 10/28/2008 10:23 (cicln03) $
Sub version: sub-version 5.10.41_USR6.127.29 (32-bit addresses)
*WARNING* Unable to start up library manager (libManager.exe) after 60 tries. There maybe an access or network problem. Start the library manager from an Unix Shell window to test the accessibility. Variable ddsvMPSTimeOut (60) can be set to increase or decrease the number of attempts. cdsServIpc: ipcIsAliveProcess connection timeout (host:neuro)
i have disabled selinux and checked on protocols in Firewall configuration and reboot the system but no improvement.
Any suggessions please??
First of all, this is an unsupported (i.e. untested) OS. This solution suggests increasing the timeout, but I suspect that won't help. What do you have in /etc/hosts ?
In reply to Andrew Beckett:
Thanks a lot for quick reply. Oh i did not that this is untested. just downloaded latest version and installed(feeling stupid now)
here is my /etc/hosts
127.0.0.1 localhost.localdomain localhost4 localhost4.localdomain4::1 localhost localhost.localdomain localhost6 localhost6.localdomain618.104.22.168 vdec-cad122.214.171.124 vdec-cad2126.96.36.199 vdec-cad3
In reply to neuro:
Not sure the reason - nothing jumps out at me. Probably best to talk to customer support (although I would check with a supported OS; for IC5141 that's RHEL4 (RHEL3 should be OK too) - follow the link from Support & Training at the top of the page to Computing Platforms - you'll get here.).
Thanks again. I will try with a compatible version first.
It just wasted me a full day....
someone told me that he installed IC5141 in centos 5.3. But i can see only Centos 5.8 available in the public mirror. All ohter version of 5 are depreciated. Should i try with 5.8, what you think.
That's not a supported OS either. It may well work, but I couldn't comment as to the likelihood.
Ahh...ok i understand
I am having a similar problem on a IC6.1.6 installation, additionally, I'll get an error about cdsServIpc connection timed out, and that the system couldn't find a 64bit version of cdsServIpc. I've seen posts on other forums suggesting that this error is simply a misconfigured network on behalf of the host, and not an issue with Cadence. Can anyone confirm that there shouldn't be a 64bit cdsServIpc, because when I try to run the 32bit version individually, it always ends in a segmentation fault.
In reply to Kaou:
The fact that cdsServIpc crashes when you invoke it with no arguments is a known issue which is planned to be fixed in IC617 (CCR 1117755). However, in practice that's not going to be the real issue here because cdsServIpc is never called with no arguments. If you run (say) "cdsServIpc -version" it should work OK.
There is no 64 bit version of cdsServIpc - there doesn't need to be because it would never need the additional memory capacity.
If you are getting errors about connection timeouts, I suggest you contact customer support with details of the precise error message and what you were doing at the time.
No changes to license setup, but that shouldn't make a difference for this issue anyway. That variable can be set in your .cdsinit - see this solution.
I really would recommend contacting customer support though.