After doing config, simply put one voltage source and resistor and gnd from analogLib, I can't run simulation with ams simulator with config.... but I can do this thing in CDB...
ncelab: 12.20-s018: (c) Copyright 1995-2013 Cadence Design Systems, Inc. Elaborating the design hierarchy:ncelab: *W,CUNOUN: Cannot find any unit under analogLib.vsource:ams in the design libraries.ncelab: *E,CUCFUN: instance 'V0' of the unit 'vsource' is unresolved in 'dh_teslib.rtest:schematic'.ncelab: *W,IELACK: The design does not contain any interface elements. The ieinfo report will not be generated.ncelab: Memory Usage - 30.2M program + 18.0M data = 48.2M totalncelab: CPU Usage - 0.2s system + 0.3s user = 0.5s total (1.4s, 35.1% cpu)Failed to elaborate ("dh_teslib" "rtest" "config").
I'm not sure why it is trying to resolve analogLib.vsource:ams - there is no ams view of vsource in analogLib. What does your hierarchy editor look like? Take a screenshot and then attach it via the Options tab aove.