I have used the "cds_thru" instance from basic lib for change the global connection to normal connectio like --> gnd! to vss. I just put cds_thru instance in schematic only, after that i have lvs error like instance error,port error etc.., Here i attached the screen shot for your reference . Please help us. Note: I am using the "umc/tsmc" foundary(PDK) . Can i change any setup to clean the lvs in calibre.
Thanks & Regards
Hi KarthikIn future, it would be better for you to post Calibre related issues to the Mentor support forum. I think you can try adding the following svrf cmd to the lvs deck:lvs filter R(sh) short PLUS MINUS sourcecds_thru devices are exported as CDL resistors with model "sh".Best regardsQuek