I have ran into a problem while I was generating a buck regulator pspice model. AP8803 (from Diodes) spice model I've downloaded from the 'Diodes' site and made a new pspice model. This is the method:
Model Editor -> New
Model -> Import (here I have entered the text file here)
Save the design
Export it to Cadence.
When I use the part I include it and it still says "ERROR(ORPSIM-15108): Subcircuit AL8803_SIMETRIX used by X_X1 is undefined" Why is this? Is there something wrong with the model? When I added the txt file in model editor with import these were the last two lines
".model Dzener D Is=1e-8 N=10 bv=1.245 ibv=1e-12 Cjo=.1e-12 Rs=.1 TBV1=4e-5 nbv=.01 .model Dclamp D Is=2.682n N=1.836 Rs=.5664 Ikf=44.17m Cjo=4p M=.3333 Vj=.5"
and there are still some data after this as well...
Can you give me any suggestions what is happening here? Why isn't it working?
This specific error is due to missing model. You need to include this library in simulation profile. You can do so by
Edit Simulation Profile
Configuration TAB- Library Files
Browse the .Lib file (the one you created using import method)
Select "Add to design"
Now this error should go away. However you may not be able to successfully simulate this model. This model is meant for Simetrix and uses device, which are not supported in PSpice (for example "B")