Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
There are enormous usability updates in the SPB16.2 release of OrCAD Capture. From new ways of managing multiple windows to the ability to place wires and parts using a cross hair cursor - all enhancements are designed to increase ease of use. You can read about the highlights below.
Tabbed windows with docking, floating, and MDI child capabilities: Now it is easier to manage multiple open windows through tabs that show tooltips with window names. You can click a tab to activate the associated window or press CTRL+TAB to navigate through different open windows. The Session Log and Project Manager windows give you the flexibility to dock them or keep them as floating. You can right-click the title bar of these windows to get options to dock the windows to the top, bottom, left, or right of the main window. You can also specify to open these windows as MDI child windows in the maximized, minimized, or restored states
Ability to close all open windows: You can close all open windows with a single action by choosing Windows - Close All Windows.
Display of net names for selected nets on the status bar: You can check the name of a net by simply selecting the net or a wire in the net. The status bar displays the name of the net when it is selected.
Increased choices for lines: You now have additional choices for line style. Two new line styles have been added to provide thicker line choices. This also enhances print-ability of the designs.
Search capability enhanced to find part pins: The Find dialog box has been augmented with a new option to search for part pins. You can now search for a pin by selecting the Parts Pin option of the Find dialog box.
Resizable split part window: The Split Part window is easier to use. You can now resize the window to adjust the number of pins visible.
Junction dot size: Now you can choose the size (Small, Medium, Large, or Very Large) of the junction dot that appears when two wires are connected. You can set the junction dot size by choosing the option from the Junction Dot Size drop down list in the Miscellaneous tab of the Preferences dialog box.
Full screen mode by pressing Ctrl+F8: You can change to full-screen mode by pressing Ctrl+F8. You can then exit the full screen mode by clicking the Close Full-screen button or by pressing the Escape key.
Cross hair mode: When placing a part on a very dense design, it is often not easy to find your way around the design. To make this task more manageable, you can turn on theCross Hair mode. This will place a Cross Hair at the edge of the mouse pointer. As you move your cursor across the page the cross hair will make it easier to locate objects like pin and nets or very small parts in your design. Use the F6 key to toggle this mode on and off.
Property editor enhancements: Enhancements include:
New project manager shortcuts: The right mouse button shortcut menu in the Project Manger includes some new useful options:
Enhanced search functionality - find toolbar & find window: Search functionality is enhanced to include a new Find toolbar. This includes a new Search options button that allows you to narrow down or expand your search to the types of objects on the canvas. Once the search is complete, the new Find window groups the search results by object type making it easier for you to track down your result. You also have the option of saving the search results to an HTML file.
New Annotation Type Option: The annotation dialog box now includes a new Annotation type list. When annotation your design you can now choose from three sequence options:
Default: This options annotates your design in the same sequence and manner as previous versions of OrCAD Capture.Left - Right: Use this option if you want the objects in your design to be annotated in the left to right order in which they are placed on the page gridTop - Bottom: You can annotate the objects in your design from top to bottom order on the page grid using this option.
Default: This options annotates your design in the same sequence and manner as previous versions of OrCAD Capture.
Left - Right: Use this option if you want the objects in your design to be annotated in the left to right order in which they are placed on the page grid
Top - Bottom: You can annotate the objects in your design from top to bottom order on the page grid using this option.
New icons: OrCAD Capture and OrCAD Capture CIS have been upgraded with new, softer looking icons. This upgrade brings uniformity across many of the generic icon styles in different Cadence products. There are eight main toolbars in OrCAD Capture and OrCAD Capture CIS.
Change the display of toolbars
Add buttons to toolbar
Reset toolbars to their default settings
As always, I look for your feedback and suggestions on using these new capabilities.
I don't see an option/setting to change the toolbar size. There's an option in the Customize section for Toolbars to "Cool Look". Have you tried changing this?
Hi Jerry, The Capture toolbar size is very small, how can i change the size?
mj, to change the screen/page size go under Options -> Schematic Page Properties, and at the bottom, set your custom size to fit your screen.
Good enhancement suggestion! Let me check with our R&D team to see if this is in the future Capture-CIS product roadmap. I'll file a new SR in your name so we can track this and reply to this blog when an answer is available.
Any chance revision control will be incorporated into future versions of Orcad CIS? Generating a Bill of Material from Orcad CIS is a snap. What I find tedious is determining which component got deleted, added, or changed since the last revision. The PCB assembly house typically wants an ECO telling them what part got changed so they don't have to re-process the entire Bill of Material each time a new revision is released. Being able to add a label, for example REV1, and comparing that to a later revision REV2 for any component changes will go a long way in making BOM generation in capture CIS much more friendly.
Hi MJ -
Well, I know a "little" about Capture. My real expertise is with Design Entry HDL (DHDL - previously known as ConceptHDL), PDV, libraries, and all the other front end tools.
I'll find out about this issue (I'm filing a Service Request on your behalf - since that's what I do - I'm a Customer Support Application Engineer), and we'll work to find you a resolution.
It looks like you know Capture inside out. Great comments, I learned alot just in the above. Question, in my previous version I could get full screen view on a 24" monitor, and now in 16.2.0.p001 I cannot; I tried the cntl-F8 but that is still only about 2/3 of the available screen size. Using all of my 24" monitor for a layout helps reduce scrolling and helps me justify to my boss the new monitor. Help!
Just to close on Mike's "add libraries" question above:
Go to Options> Preferences> miscellaneous
[Dock Place part] - uncheck this.
You need to re-invoke Capture.
Hi Mike -
Sure, you most certainly can provide input on areas of the products that need improvement. I'd like a little more clarification on the details of what is not working properly in the Capture part look-up window and I'll Email you on this.
I don't know if this is the correct forum for dissenters, but I am not a fan of the new part lookup in Capture. In fact, on my laptop it is unusable, since the window does not scroll, it does not let me add in my libraries. As I speak I am going to have to remote login to my work to make simple changes.
"If it aint broke, don't fix it"
I'm not sure how ThomasH's reply maintained the format.
Our Blog IT folks are checking into this and I hope to have an answer soon.
Thanks again for the additional suggestions. Look for new SRs from me next week.
Sorry for the inability to format my above post. I hope it can be read. How is ThomasH's post formatted nicely??
Thank you Jerry for taking a look at my suggestions.
I thought of a couple more:
11. If there's a problem during simulation, the Simulation Output File will indicate the problem. It would be fabulous if the errors were clickable links that jump to the schematic and highlight the net, or part, or whatever element is causing the error. Similar to how PCB Editor's pop up boxes have clickable coordinates.
12. I can't find a way to get the Find Window dialog to the right side, with the Place Part dialog. If this can be done, do tell. If not, that would be nice.
13. Since so much of the UI is not prettier, how about cleaning up the last few windows that linger on with outdated looks? For instance, the Select Directory window (accessed by the Browse button in the New Project window) is unfashionably Windows 2000.
Wow Evan! Outstanding and very detailed suggestions.
For those who may not know, Evan represents one of our strategic customers with the Cadence front-end products. I've worked with Evan over the past couple years in the DEHDL space. He has provided numerous and valuable feature and methodology suggestions to our R&D and Marketing teams - with some becoming new features within the products.
I will digest each of these and take your input to our R&D/Marketing teams to see what might be on the future roadmap for some of these enhancements. As you know, my usual style will be to track these personally with you through Service Requests and CCRs. I'll be filing these over the course of the next few days and provide you updates. For any suggestions that become confirmed / committed features in a future release, I'll mention those back into this blog. Jerry GenPart
I LOVE all the new features in Capture. The tabs make it so much easier to work with multiple projects at once, the Find features are spectacular, and the Place Part dialog is a huge time saver! That fact that Capture looks so much prettier is icing on the proverbial schematic entry cake! Not only is there more power, but it's easier to access all the power. Way to go Cadence - give yourself a pat on the back.
Not to downplay all the wonderful progress made, but here are a couple of suggestions I'd like to make:
1. I like the Session log in a tab, and by default the Session log is docked at the bottom of the Capture window and I don't have the 'Docked to' and 'MID child as' options under the RMB menu. How about adding those options even when the Session log (or other similar menus) are already docked. In fact, why aren't these RMB options available when clicking on ANY window (like a tab)? It doesn't make sense to me that I have to pull a window out and make it floating before I have the ability to arrange it in any possible fashion.
2. A one-click way to close tabs, instead of the RMB menu of the little 'X' in the upper right of the Capture window. Perhaps a little 'X' on each tab?
3. A way to re-arrange tabs (or possibly all tabs in a project, as the tabs in a project should always stay grouped together, I think). That's a minor enhancement.
4. Why not combine the Tools and Options menus? They appear to cover the same things to me and only a Tools menu seems more common in most Windows applications. Plus, Probe has Customize under the Tools menu and no Options menu.
5. The ability to auto-fit the tab width and/or set a max and min tab width. Because the tabs are rather small by default, similarly named projects open at the same time can get confusing. If I could expand the tab width I'd more easily be able to see what was happening in each tab.
6. I'd still like to have the site configuration ability in Capture that is available in DE HDL and PCB Editor. The inability to provide a standard set of customizations for all Capture users at my site is limiting. There are many options, settings, menus, UI features, network links, etc. that I would like to change from the Capture default and standardize for all users but I am unable to do so.
7. ThomasH does have great suggestions - I am especially fond of 1, 2, and 8.
8. I think even more could be done with the right side dialog (tabs) instead of just Place Part. A combination dialog (tab) controlling New/Edit Simulation Profile, with a Profile switcher, would eliminate having to open up separate floating windows to adjust simulation parameters. Or an Options dialog, similar to PCB Editor, could be used to set line width and junction dot size when drawing wires, for example. A dialog (tab) for 'post-process' Project Manager options seems to make sense to me; I'm envisioning a dialog (tab) that combines Annotate, DRC, Cross-reference, and/or BOM functions instead of having separate windows popping up for all those features.
9. Going along with #7 above, how about a Simulation dialog (tab) that adds all the Advanced Analysis and Markers into a single tab? I very often use the Advanced Analysis Markers and I'd much prefer an innocuous pop-out dialog (tab) instead of having to dig through multiple levels of the menus to get to the marker that I want.
10. And finally, when moving parts/wires and markers, the some marker get 'caught' and don't move with the other elements, but some do. Then I get a dialog box telling me "Voltage/digital level marker will be ignored..." and I have to move the markers back onto the circuit where they belong manually. I've been dealing with this for a long, long time. Is there a plan to ever fix this??
And a little note for Probe: wouldn't it make more sense to have the Toggle Cursor icon in the Cursor toolbar instead of the Probe toolbar?
Hi Thomas, I have some high level answers to some of your suggestions. For our SPB16.3 release, there's a "Design Navigation Improvement" project which will provide several usability enhancements. This is still being worked, so please don't expect all of these to be in the next release. The first 4 items in your list would fall under this project and the R&D and Marketing teams are considering them as part of this project. Thanks again for your great ideas!