Get email delivery of the Cadence blog featured here
Users of ESL tools are curious about the procedure for handling the interface to a
bus or other communicaton protocol in a High Level Synthesis
environment. This is usually formulated in the following question:
“How do we take into account the interface to the bus/processor for a piece of IP going into C-to-Silicon Compiler?”
There are two ways of addressing this issue using CtoS. The first
option is to model the interface at the signal level using sc_signals.
For example, a simple request-acknowledge interface would be written as follows:
while (acknoldege.read()==0) wait(); // wait until
in = input.read();
A more complicated interface, for example a DMA transfer, would be similarly written:
(acknoldege.read()==0) wait(); // wait until acknowledge.
address = 0;
// Loop as many samples as the DMA read requests
data[i] = data_bus.read();
... process the N samples of read data
When Transaction Level Modeling is used, the signals are
abstracted away and I/O operations are performed by passing pointers or
using function calls (Transactions). By doing this, there is a
decoupling of the algorithm with the method it uses to communicate to
the external world. Not having an interface “hard wired” in the design
makes the design more flexible and re-usable.
CtoS supports synthesis of Transaction Level Modeling (TLM). Also,
synthesizable TLM models of common bus protocols are available. The
details embedded in these models provide CtoS the information necessary
to synthesize the signal-level interface for the generated RTL from the
High Level System C code.
It is important to emphasize that, in CtoS, both the algorithm as
well as the TLM or signal based interface are described in a High Level
Language (System C).
Less Effective Interface Synthesis
Rather than synthesizing an interface from a High Level Language
such as SystemC, other technologies, such as pure C/C++ High Level
Synthesis tools, decouple the algorithm from the interface by writing
the algorithm in a High Level Language such as C++ and instantiating
the interface from a pre-written menu of interfaces written in Verilog
This approach has the following disadvantages:
Since the approach followed by CtoS does not have these
disadvantages, I believe that CtoS’s approach is superior to a mixed
C/C++-RTL interface synthesis approach.
This Team ESL posting is provided by Dr. Sergio Ramirez, Sr
Staff Product Engineer for the C-to-Silicon Compiler high level
synthesis product. Product Engineer for the C-to-Silicon Compiler high
level synthesis product.