Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Make sure that you have any Capture related processes closed, a reboot should get you there. Find the active Capture.ini file, usually in the installation in tools\Capture and rename it. Start Regedit.exe, find the HKEY_CURRENT_USER\Software\OrCAD\CaptureWorkspace key and delete it and the subkeys that belong to it, then close regedit and see if that fixes things. Get the latest hotfix.
In reply to oldmouldy:
In reply to DrLightning:
We had an XP machine running 16.2 fine. Installed 16.3 into a new directory and it wouldn't load. Removed everything, 16.2 and 16.3 then reinstalled 16.3. Still has the same problem, when I launch orcad cis the first time it never loads. I can see the capture.exe process running in taskmgr, it grabs 50% of the CPU and will hold that for at least several hours without ever fully loading.
I tried renaming the capture.ini file and deleting that registry key also, but still no luck.
Any other options to try on this ?
In reply to bmccarty12:
Me too. OrCAD Capture 16.3-p008 was working fine. All of a sudden, when I loaded it again, I would get the splash screen. A moment later the splash screen would go away, but the program window never came up. On Windows 7 when I mouse over OrCAD Capture on the task bar, I would get a short window with the program name in it, rather than a thumbnail of the main window -- I think this means the main window wasn't created yet, much less displayed. Task Manager showed the program, but not as "Not Responding". The program easily exited from task bar close window option on popup.
I renamed Capture.ini and the program began working again.
Yep, very buggy...
I fell and was also needed for the same situation.
However, your reply was seen and the problem was solved.
I only exported and performed the contents of registry from another personal computer with which OrCAD16.3 operates normally.
In reply to Ponjovi:
I have a ticket in on this since 8/24/2011
Ticket number: 42991072
It happens in 16.3, and 16.5 but have not seen it 16.6, yet.
Here's how I fix it (Instructions from cadence support):
to task manager and see if any cadence process (capture.exe, cdsMsgServer.exe,
cdsNameServer.exe) is running. If so please kill it manually.
to Start > Type regedit. This opens registry editor
c. Now locate and delete 16.3 key
located at HKEY_CURRENT_USER\Software\OrCAD\CaptureWorkSpace
Once this is done the problem will only come back after I do a hotfix.
Hopely Cadence will figure this out.
In reply to Wild:
Recieved an update from the cadence support team:
CCR#1050230 associated with SR# 42991072 is still in Planned state, means it was not fixed in current ISR.
I have a simpler method (since this has happened in 16.2 as well)
1. Buy new hard drive
2. Reinstall XP
3. Wait 4-6 hours for XP & updates to finish
4. Reinstall all old programs (2-3 days)
5. Reinstall Cadence libraries, custom ones, not the ones that come with Allegro that we all throw away
6. Reinstall Cadence (2-3 hrs)
Your method might work but mine is guaranteed!
(This is just smart alec joke but it does document how I had to fix mine)
Wow............Wonderful..............This works Greats
Thank you very much oldmouldy :-)
In reply to IceCube:
good day, please help! cant open stroke file. please check below for details. thanks
Opening existing drawing...Grids are drawn 39.936, 39.936 apart for enhanced viewability.W- (SPMHDB-214): Allegro PCB Design XL opening an Allegro Expert design.W- (SPMHDB-213): DRC set to "out of date". This product supports a different DRC set than last product used on drawing.E- Can't open STED stroke file 'Üõ¥‘m¾uQm¾u®ÑZ'.E- Stroke not recognized.
Thanks, This fixed my problems with windows 10.