Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I am new to PCB Editor 16.5 coming from Orcad Layout 15.7. I have been using Orcad products to do pcb layouts since it first came out back in the 80's. I would consider myself an expert user in Orcad Layout. I have found the transition to 16.5 to be nothing short of painful and I am looking for some guidance to help ease the pain..........
Any tips / lessons learned from folks that have successfully made this jump would be appreciated.
There is a great book avaliable written by Kraig Mitzner - Complete PCB Design using Orcad Capture and PCB Editor. Although it written for version 16.0 the basics are the same. I would also recommend talking to either Cadence or the VAR that sold you the software. Most VAR's have excellent resources, PDF's, videos, tutorials, training that help users make the switch.
If you have specific questions then you've found the correct forum to ask. Good luck.
In reply to steve:
Thanks for the response Steve.
I do have Mitzners book and it does cover a lot of things, but............ For example, I started out making a simple 16 pin footprint for practice. Accidentally made it 17 pins. Could not figure out how to delete pin 17. Spent at least one hour on it, book was no help as well as online resources. Ended up opening a trouble ticket (boy did I feel stupid doing that) and found how to do it. Frustrating in that in 15.7 I could just hit the delete key or open up a the footprints spread sheet and delete it there. In 16.5 I have to set filters, pick edit then delete and sometimes it works, sometimes it doesn't. I have to figure out the correct sequence. So what used to be one or two clicks or key presses is now at least doubled. That is one of the things I'm finding is that there are a lot more clicks involved in doing things now.
I'll be sure to try here first with specific questions.
PS: I also miss the backspace command to turn the layers off, plus "i", "o", "c" for zooming and a simple "v" for via............
In reply to TH Designs:
Is it true that I can download 15.7 and use that to maintain legacy designs while moving forward with new designs in 16.5?
Found out you can only run 16.2 and 16.5. But 16.2 will allow me to edit / maintain .max files which is what I was looking for.
Trying to set up user defined function keys. App note referenced above says to edit the env file located in the %home% directory. I have no such file in the pcbenv directory. I have "allegro.geo"; "allegro.ini: and "allegro.mru". That's it, no "env" file.
Am I looking in the wrong place? Did a general search for a file called env and nothing turned up.
The env file is written when you make a change to the User Preferences. If you haven't done this go to Setup - User Preferences then just click apply. This writes the env file to the %HOME\pcbenv folder. You can then edit in a text editor.
Thanks Steve. Worked like a charm. I can now zoom in and out using i and o.
Do you know if there is a list of commands or the syntax for the command that I can use when assigning keys?
You can either use Tools - Utilities - Keyboard commands - which lists ALL commands but I think a better way is to type scriptmode +e at the command line, this then sets PCB Editor so anytime you do anything (like Edit - Move) you would see the actual command name at the command line. This example would display CMD> move. This is the bit you need for the alias. Scriptmode is only active for this session. If you close PCB Editor down you would have to type it again to see the commands.
When routing in OrCad PCB Designer and I want to jump onto another layer I must either right click and select a layer from the "Change Alternate Layer" or select the new layer from the options menu. I was curious if anyone knew if I could create a function key in ENV FILE? (C:\SPB_Data\pcbenv))
After reading your posts I was able to get this command from the command window. (pop dyn_option_select 'Change Alternate Layer@:@INNER2')
Funckey l pop dyn_option_select 'Change Alternate Layer@:@INNER2'
When I apply it to the ENV File and reload PCB Editor. Nothing happens when I am routing a new trace.
Am I doing something wrong?
Also is there a command that would allow me to cycle through all my "Alternate layers"?
In reply to JT15:
Your better off using the working layer option. Take a look at http://www.youtube.com/watch?v=FzEWtlLJARk
I try to open two site you post, but nothing could open at this time. It looks need extra login for this parallet system
Can you send me the artical? firstname.lastname@example.org
In reply to Leeya:
Sorry the website has been updated. Take a look at:- http://www.parallel-systems.co.uk/products/user-guides