Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Hi, I have been developing a simple PCB board which contains a PIR sensor, an LDR and some other discrete components along with MSP430G2231. I have done outlines for my board according to its dimension. Now, i would like to cut some part in middle of the board. Is it possible to do this, cos, i have seen some board in which part in middle of the board is cut.
Can anyone help me with this?
I use the board geometry/assembly layer to show the outline of the board panels along with areas to be routed out of the board. For example I have a thermistor on the board and do not want any heat on the board getting to the thermistor so in the mentioned layer I give x,y cords for the fabrication house to route out certain areas.
An alternative method is to just draw it on Board Geometry / Outline layer. You can include fillets or chamfers on the corners using Manufacture - Drafting - Fillet. You can use zcopy to add a route keepout,
You can also output this info as a ncroute file for the manufacturer. Take a look at :- http://www.parallel-systems.co.uk/images/PDF/slots_pcb_editor.pdf for more details.
In reply to steve:
Ya, i use Board Geometry / Outline option to represent outline of my board as well as the area needed to be cut.
My doubt is, will there be any confusion between my board outline and the unwanted area to be cut.? Cos, Both the things are mentioned using Board Geometry / Outline.
Do i need to mention this to Fabrication house?
In reply to Gopintj1:
In the case when there is an irregular cutout inside of the Board Outline, which cannot be represented by a slotted padstack, I would define the cutout with lines on Board Geometry / Outline. On the fabrication drawing, I would add large text inside of the cutout indicating that it is a cutout area. "CUTOUT AREA" Almost all Fabrication houses will review the fabrication drawing in the early stages of fabrication and it would be clear at that point that there is a cutout.
I would also consider generating a NC Route file using a line on Board Geometry / Ncroute_Path and output the route file using Manufacturing > NC > NC Route... (Process is described in the PDF that Steve provided)
Hope this helps,Mike Catrambone
In reply to KEN13:
I should also mention I still use board geometry/outline to show the outline of the board for layout of the board, that way I can turn off the board geometry/assembly layer to unclutter the screen.
I show all the cutouts, scoring, panel layout and the outline on the board geometry/assembly. One more note...the board house we use usually used a 3/32 router bit, so I usually draw the routes using a line width of 94mils and give them x,y cords. This way it is a visual view of what they will be routing.
Have a great weekend,
It might be that you are hovered over Pin1 and it highlights to show you that you are hovered over it or you may have applied a permanent highlight to it. Try using Display - dehighlight (make sure Pins, nets are selected in the find filter) and then click the pin with the left mouse button.
I tried to dehighlight the pin, but it dint work. Could you please explain what does "hovered over Pin" means? And how to eliminate it.
"hover over" - When you move your cursor over an object it may temporarily highlight depending on what objects you have turned on in the find filter.
In reply to padmaster:
You should create a new thread for your problem. It has nothing to do with the subject matter of this thread.