Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Again can not "Drill Legend"
message --> E- *Error* renameFile: file exists
Try deleting the nc_param.txt file and recreate it.Which specific version of the editor is being used? You can find that information from Help >About.
In reply to Rik Lee:
In reply to kornfind:
With artwork you have the capability to output either Inches or Millimeter data. This setting should match what your design is in (Setup >Design Parameters; Design tab) where the artwork parameter inches should be used with design in Mils or Inches. Other design units should use the artwork format of Millimeters.Your drill legend can be output in any unit that is listed in the pulldown for "Output unit". As this is just a textual output it can be whatever you like.The warning "WARNING: database resolution exceeds the resolution of the output coordinates (see FORMAT in parameter file)" relates to the database resolution and the format you are using for your artwork. A MILS database with an accuracy of 0 is the equivalent of INCHES with 3 places of accuracy (.001 inches) so your artwork format should be Integer 2 Decimal 3 for Vector based artwork. For Raster based artwork, which wants the artwork output to be 1 decimal place greater than the design units, that would be Integer 2 decimal 4Database units/accuracy Raster(RS274X) output setting Vector (6x00,4x00) settingsMILS 0 Integer 2 decimal 4 Integer 2 decimal 3MILS 1 Integer 2 decimal 5 Integer 2 decimal 4MILS 2 Not applicable Integer 2 decimal 5
I will assume you are generating vector (6x00, or 4x00) artwork.Do you have an art_aper.txt file in the directory or the path specified by your artpath variable?When you are in the "Edit Aperture Wheels" GUI select 'OK'.An art_aper.txt file will be created.If this does not work select from the Allegro menu Tools >Utilities> Env variables. A list will be presented to you. Save this file and attach it to a new message or send it to email@example.com along with a number I can reach you at.
In reply to DonlAZ:
In reply to oldmouldy: