Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I have an issue with the axlGetFindFilter() command. I have a small SKILL script for Find & replace text in the DB. In the code below I was trying to get the initial Find Filter setings and backup them, before I change it to TEXT, how ever it only returned nil, so I'm not able to backup them.
Second issue is that axlSetFindFilter(...) will not work when I execute my script when another command is actually running in the PCB editor (e.g. move). Is there any command whit which I can get the state of the PCB Editor, so I will be able to notice the user that another command is runnig and he need to close it first, before execute the script?
moFindFilterEnabled = axlGetFindFilter(nil) > this returns nilmoFindFilterButtons = axlGetFindFilter(t) > this returns nil println( moFindFilterEnabled) - just for check println( moFindFilterEnabled) - just for check axlSetFindFilter( ?enabled list( "noall" "text" "invisible") ?onButtons list( "noall" "text")) axlAddSelectAll() moAllTexts = axlGetSelSet()
REST OF THE CODE
) > sets only the TEXT as enabled and on
I think axlGetFindFilter only works when fields are set by axlSetFindFlter, and active command is idle.
regarding second issue, to check when a certain command is active by using axlOkToProceed.
You should register your skill entry point as an Allegro command via axlCmdRegister. If you register it as an interactive command then the system will 'DONE' any other interactive command before calling your Skill code.
axlGetFindFilter returns a nil because no other Skill code has set the find filter. Commands like move, delete, etc. have their own find filter settings. These settings are not shared with the Skill environment.
In reply to fxffxf:
Thanks guys for reply. I will try it. When the code will be registered as the command, will it handle also the Find Filter settings? I want to make it clear that it don't mess with the last used filter in the Editor (in idle mode).
In reply to serpens:
axlGetFindFilteraxlSetFindFilter is provided tosupport a push/pop programming strategy.
For example, your code enables the find filter to allow the user to control what objects they select. After they selected an object your code might need to find other objects using the find filter. In this case, this utility to find other objects would want to preserver the original find filter settings.
With normal command level programming you don't need to restore the find filter. An exception is if you are writing a utility function that is used by other Skill code then it is good programming practive to restore the find filter if your utility function changes it.
Cadence commands either have their own persistent find filter settings they set when the command starts or use fixed set of initial settings.
If you are writing your own command level code, you should assume that the intiial find filter settings are undefined and you always need to set them to the values your command intially requires.
Thanks again for quick reply. I've registered the function with the axlCmdRegister() and it works fine for closing the running command.
But I still have issues with the Find Filter. I use the filter to get dbids of all texts in the DB for my SKILL code. If there is another way how to avoid using the filter to get the dbids of all texts in the whole design this will solve the problem too.
If I understand it correctly, there is no way how to preserve the setting of the Find Filter for the Idle mode of PCB Editor?
Now my SKILL code behave like this in relation to Find FIlter.
- there are some setting (user selected before)- after executing my SKILL code, the code change the Find Filter settings to text only (enabled and on_button)- then when the code ends and return to the PCB Editor, the Find Filter settings remain set to text only available option- user need to execute some another command e.g. move, slide, etc., then done the command and after this the Find Filter enables all usually enabled options- how ever the on_button stay on text only
Even the code work I would like to fix this behavior to make it more user friendly.
If there is interest, attached is the SKILL code. After loading the code it is necessary to run it by typing mo_bfr to the command line.
You don't need to preserve the find filter for Idle mode. There is a mode that leaves the find filter editable which allows you type on the command line without restoring the Allegro idle mode after each Skill evaluation but if you start another Allegro interactive command it will switch the find filter back to that command's settings.
I would have to believe that if Allegro commands work differently because of your find filter settings then it is a bug that should be reported to Cadence.
I don't fully understand you in the next reply. The Find Filter settings for the standard commands works fine (they aren't affected by my SKILL code), only the settings for Idle mode are affected. Try to run my code and look like the Find Filter behave after you click on Execute button and then close the form.
Hi, I've done a picture to better describe my problem.
I start with the FF set to "All On" [1.], then when I run the code and hit "Execute" the FF changed to text only [2.] note that all another options are gray. After closing the form (code) the FF stays the same [3.], note the options are still grayed. In this point I would like to enhance the code that way it ends up like it is on [6.]. That means after closing the form window it should return to the last used FF settings (set before running the code).
After closing the form window I must run another command e.g. "move" and it sets it's own FF [4.]. When the command is closed, the FF enable the grayed options, but stay set for text [5.].
I know how to change the code to goes from [1.] to [2.] and then directly to [5.], but I don't know how to make it run like [1.] to [2.] then to [6.]. Of course the setting on [1.] are just example, the settings may vary but in the end [1.] and [6.] must match.
I hope this will bring a little light in to my problem.