Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I am using SoC Encounter 10.1. While importing the design I load the netlist file (i.e. *.v file) and then add the LEF file to the list.
When I press OK then I get this error.
I am unable to resolve this issue.
Any suggestions ?
Can you explain more about how exactly you're loading the data? Are you using commands? The GUI? You should be using the Import Design form, which has specific fields for the verilog, LEFs, etc. Make sure you have a tech lef and that it's the first lef that gets read in.
In reply to Kari:
Ya Actually I am using GUI for importing design.
I added the netlist (*.v) file. Then I have to add the LEF file I only loaded one LEF file i.e. named like
you mentioned the tech lef file.. Where could I find a tech lef file ?
In reply to Sohaib Qazi:
I'm just guessing, but it seems like the LEF you're loading is just for a set of std cells. The "tech lef" is a lef file that has the layer and via definitions, spacing rules, etc. Sometimes it's part of the std cell lef, sometimes not. You can usually get it from the either the std cell vendor or from the foundry.
Thanks, I resolved the previous issue.
But now I am facing another problem. When I Import the design I get the pin size too large. How can I educe the size ??
Does it depend on LEF file or what ??
Image is below.......
Looks like you're also loading a floorplan file of some sort. Can you check that and see if the pin sizes are defined? I've never seen this, and these triangles are not actual pin shapes, just markers, so I'm not really sure how their size is controlled.
I found the problem and resolved. Actually I was not using any Floorplanning while taking the pic that I shown before.
Now I am facing another problem. I am unable to route the design properly. After setting up the Floorplan the design when I place the Standard Cells it also routes the metals as well and the metals are overlapped. I am not sure why it does so and how could I overcome this issue.
I am attaching a pic of the layout as well.
Right after placing the design, it is possible that a trial route is also launched.
If true, then it is quite normal to have obvious violations such as overlapping wires.
Run a nanoroute on your design, this should give you a more correct routing (not always DRC free though, but your small design can't possibly have such problems, unless you set some really compelling blockages)
In reply to DavidMZ:
I am unable tofigure out the problem. When I run the nanoRoute then I get an error and I am unable to get through this also
I get some Warnings and Errors,
#WARNING (NRDB-318) MINIMUMCUT rule specifying 1 (<= 1) cuts for LAYER M1 is ignored#WARNING (NRDB-318) MINIMUMCUT rule specifying 1 (<= 1) cuts for LAYER M1 is ignored#WARNING (NRDB-318) MINIMUMCUT rule specifying 1 (<= 1) cuts for LAYER M2 is ignored#WARNING (NRDB-318) MINIMUMCUT rule specifying 1 (<= 1) cuts for LAYER M2 is ignored#WARNING (NRDB-318) MINIMUMCUT rule specifying 1 (<= 1) cuts for LAYER M3 is ignored#WARNING (EMS-27) Message (NRDB-318) has exceeded the current message display limit of 20.#To increase the message display limit, refer to the product command reference manual.#WARNING (NRDB-2005) SPECIAL_NET vdd has special wires but no definition for instance-pin connection. This will cause routability problems later.#WARNING (NRDB-2005) SPECIAL_NET gnd has special wires but no definition for instance-pin connection. This will cause routability problems later.#NanoRoute Version v10.10-p002 NR101202-1141/USR66-UB#WARNING (NREX-28) The height of the first routing layer M1 is 0.000000. It should be larger than 0.000000#WARNING (NREX-29) The metal thickness of routing layer M1 is 0.000000. It should be larger than 0.0. Add this to the technology information for better accuracy.#WARNING (NREX-30) Please also check the height and metal thickness values for the routing layers heigher than routing layer M1#WARNING (NREX-4) No Extended Cap Table was imported. Not enough process information was provided either and default Extended Cap Table database will be used.#WARNING (NRDB-2040) Rule LEF_DEFAULT doesn't specify any vias that satisfy a minimum area rule on M2 M3 M4 M5 M6 M7 #WARNING (NRDB-778) No multicut vias are defined for LAYER M1 in RULE LEF_DEFAULT. When a LEF MINIMUMCUT rule is defined for a layer, you must define multicut vias for the layer in the LEF file. Edit your LEF file and read it in again.#WARNING (NRDB-778) No multicut vias are defined for LAYER M2 in RULE LEF_DEFAULT. When a LEF MINIMUMCUT rule is defined for a layer, you must define multicut vias for the layer in the LEF file. Edit your LEF file and read it in again.#WARNING (NRDB-778) No multicut vias are defined for LAYER M3 in RULE LEF_DEFAULT. When a LEF MINIMUMCUT rule is defined for a layer, you must define multicut vias for the layer in the LEF file. Edit your LEF file and read it in again.#WARNING (NRDB-778) No multicut vias are defined for LAYER M4 in RULE LEF_DEFAULT. When a LEF MINIMUMCUT rule is defined for a layer, you must define multicut vias for the layer in the LEF file. Edit your LEF file and read it in again.#WARNING (EMS-27) Message (NRDB-778) has exceeded the current message display limit of 20.#To increase the message display limit, refer to the product command reference manual.#WARNING (NRDB-2040) Rule virtuosoDefaultSetup doesn't specify any vias that satisfy a minimum area rule on M2 M3 M4 M6 # M1 H Track-Pitch = 10.000 Line-2-Via Pitch = 0.180# M2 V Track-Pitch = 10.000 Line-2-Via Pitch = 0.200# M3 H Track-Pitch = 10.000 Line-2-Via Pitch = 0.200# M4 V Track-Pitch = 10.000 Line-2-Via Pitch = 0.200# M5 H Track-Pitch = 10.000 Line-2-Via Pitch = 0.200# M6 V Track-Pitch = 10.000 Line-2-Via Pitch = 0.800# M7 H Track-Pitch = 10.000 Line-2-Via Pitch = 0.800# AP V Track-Pitch = 10.000 Line-2-Via Pitch = 5.000#ERROR (NRDB-158) There is no default via from LAYER M1 to LAYER M2 in RULE LEF_DEFAULT.#Cpu time = 00:00:01#Elapsed time = 00:00:01#Increased memory = 1.00 (Mb)#Total memory = 308.00 (Mb)#Peak memory = 342.00 (Mb)#WARNING (NRIF-19) Fail to complete globalDetailRoute on Tue Feb 14 14:30:07 2012
How can I resolve this issue ????
Apparently it is still a tech lef problem, because, for example:
"#WARNING (NREX-28) The height of the first routing layer M1 is 0.000000. It should be larger than 0.000000"
shows that either your tech lef file is badly defined, or that encounter is using a default value.
As stated by Kari previously, this type of information (layer height, spacing, via rules, etc...) is defined in the technology .lef file. To be sure you have such information, just open the.lef files you are using and search for layers definitions looking like that:
If none of the .lef files you are using have such definitions, then you are still missing something. I would advise you to dig a bit into the directory in which you have your technology/library files to find it.
Also, it may be the order of your lef files that is not correct. In the Import Design form, the correct order is to specify first the tech .lef file, then the stdcell .lef file (if in a separate file), then the block .lef files.
If everything else fail, then go back to step 1: ask your vendor/foundry to provide you this tech .lef.
I checked the LEF files and I think the layers are defined properly. One of the layer definition is
LAYER M1 TYPE ROUTING ; DIRECTION HORIZONTAL ; PITCH 10 10 ; WIDTH 0.09 ; AREA 0.042 ; SPACINGTABLE
But still I can't get throught the error that I mentioned earlier.
When I finish the floorplan I am unable see the blocks that supposed to be appear around the floorplan area.
I am attaching the figure please suggest if something is possible ....
There are no site rows in your design (and also, what are the blocks you say are missing? standard cells? power rings?)
I still find your tech lef strange. If for example the unit defined is the micron, we see that you have a routing grid with a distance between the routing tracks (defined by the PITCH statement) of 10 microns, even though the default routing width (WIDTH statement) is 0.09 microns. The width can be more of course, but my point is that it seems illogical to allow a so small width with a distance a hundred times more important.
Could you please let me know how your resolved the problem?