Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I want to model a 40cm FR4 line in Cadence using the
parameters provided by manufacturer. I modelled a 4cm line using mtline
model and LMG tool in it. A parameter of fmax is set to 18GHz as I have
to operate at 16GHz.
When I tried to model a 20cm TLine, I received error message that, the tool cannot model lines with more than 5 wavelengths long.
Could somebody tell me how to model a 40cm transmission line in Cadence using given parameters? Which tool does this sort of modelling?
Thanks in advance.
I want to model a 40cm FR4 line in Cadence using the parameters provided by manufacturer. I modelled a 4cm line using mtline model and LMG tool in it. A parameter of fmax is set to 18GHz as I have to operate at 16GHz.
Could somebody tell me how to model a 40cm transmission line in Cadence using given parameters? If yes, which tool does this sort of modelling?
Thanks in advance.
In reply to Andrew Beckett:
Please do not post the same question in multiple forums. If it's in the wrong forum, we'll move it. You are merely likely to irritate people by posting in more than one place.
I'll merge this with the same question in the RF forum (seems as good a place as any).
My guess is that you're using the standalone "lmg" tool (from the question). If so, this is obsolete and should not be used.
Instead, place an instance of the "mtline" component from analogLib, and choose the Type of Input as being "Field Solver". Then enter the physical parameters about the line in the property fields for mtline - you can still press "Display Cross Section" to visualize it.
The benefit of this approach is that the solver is run within the simulator, and generates the RLGC matrices (which are per-unit-length, and so do not have a length limitation). Because it's done in the simulator, you can parameterize the line's physical parameters, and sweep them, and so on.
With lmg, you could choose to produce either a lumped model or RLGC parameters. The lumped model had to know the physical length of the line, because otherwise it couldn't lump it - and this had limitations on the length of the line.
Since lmg has not been maintained, it will not have any of the improvements or fixes in the built-in field solver which is part of mtline. So you really should use that.
In reply to saurabhsant:
Do not use LMG . It is no longer supported and hasn't been updated (fixes, enhancements) in a number of years. If mtline isn't working, you may need to look at the nport. Please see the following Cadence On Line support solutions:
The mtline appNote:
are using mtline with significant skin effect and dielectric
loss at high frequency, you will need to use the workaround
in Cadence On-line Solution 11684156.
you may get incorrect results.
fmax (nport or mtline) needs to be set to the highest frequency of interest (this includes harmonics. I suspect you need to set this higher.
Sr. Staff Support AE, Global Customer Support
Cadence Design Systems, Inc.