Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I am a newbie engineer starting my career in IC design and working on a high frequency oscillator (38 GHz). I am using Cadence IC6.1.5-64b.500 version and using spectre simulator for the schemtic design and simulations.
I am having doubts about my 'pnoise' analysis. All the research papers I have referred show the graph of phase noise (dbc) vs. frequency which have values of phase noise(PN) in negative i.e. around -90 to -100 dbc (the graph should be like the flicker noise graph) but I am getting positive values of PN(with similar type of curve). I have used the 'relative harmonic as 1 and all the settings seem to be as described in the cadence simulation guide.
I have referred most of the community forum in EDAforum,designer-guide and even the Cadence community...there are problems related to this..but there is no definite answer as to how i can get the correct graph as shown in most of the research papers...In one of the community one guy gave an explanation of the equation spectre uses to simulate pn...My question is whether i need to make changes in the circuit or some settings in cadence...
Kindly help me as it is my first major project and need to do well...thanks in advance..
Have you already seen http://www.designers-guide.org/Forum/YaBB.pl?num=1050465395 and http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNumber=1832229? Are you comparing the phase noise values at similar offset frequencies?
In reply to Frank Wiedmann:
Thanks Frank for replying. Yes, I have seen that post-it explains the equation which spectre uses to find the pnoise...but it doesnt help me to get the right graph with negative values of pn.
I am doing the pss-pnoise simulation using the following settings:
PSS : Harmonic Balance
beat freq - 37.93G
no of harmonics -10
accuracy defaults - liberal
Pnoise : sweeptype - relative
relative harmonic - 1
start stop from 10K to 10 M
sweeptype - log & points per decade -10
max sideband - 10
positive o/p node - q+
negative o/p node - q-
input source - none
noise type - sources
And there is no augmented option in the convergence parameters in options....I think Andrew mentined it in his post that augmented is used in the new version by default...
Customer Support Director - Analog/Mixed-Signal/RF AEs
Cadence Design Systems, Inc.
In reply to rohan kr:
It's very difficult to tell what the reason for your problem is without being able to examine your circuit in detail. I don't see any obvious errors, but you should try if selecting conservative accuracy defaults changes anything and should make sure that you are using the oscillator mode of the pss analysis and a recent version of Spectre.
If that doesn't help, ask an experienced colleague to examine your circuit or submit it to the Cadence Support. The problem could be anywhere: from unrealistic noise parameters in your transistor models to problems with the sizing of your circuit components, leading to incorrect operating points.
In reply to Tawna:
I am very thankful for your reply...Read a lot of posts by you and Andrew in various topics and a fan of your knowledge and work..
I got the correct graph yesterday when I changed errpreset to 'moderate' and putting tstab as 60n..but the values of phase noise was aroung -140dbc/hz at 1Mhz offset...I was surprised as to how it could be so low...
Today,after reading your post,I changed errpreset to 'conservative' & the simulation is failing..the output logs had few warnings-
C0.dsx.dnwx:breakdown voltage exceeded
C0.dsx.dnwx:junction current density exceeds 'imax'
and after that the error came-
maximum number of iterations reached.Simulations failed to converge.you can try to increase tstab and harms.
I increased the tstab from 60n to 100n and the harmonics from 10 to 20...the simulation still fails...
Also, thanks for the urls you posted...it helps just knowing that people are there to help amateurs like me...
Really appreciate your help..I have put my latest schematic in this post..if you have time to have a look...I haven't used the oscillator mode in pss analysis..
I have a few other problems too which i will be posting separately..
I am having trouble getting quadrature output..i.e. the I and Q signals run in phase right now...Earlier the pmos transistors in my circuit were having w/l as 100u/60n and the nmos were 25u/60n ..at that time i was getting good quadrature phase....but now i reduced the size of all trans (which my supervisor suggested was very big and told me to increase L and C values) to almost 45u/60n....
The pmos transistors are in cutoff and are just used for coupling to lock the 2nd subharmonic & generate quadrature op...so the transient waveform has a dc level at 1.5 V(which is the supply voltage)..I am not sure if this is correct even though the signal swing I am getting is nearly 1 V or even more..I know it shouldn't be this high..also if i connect a port to i+ and i- terminal with resistance of 100ohm , the swing just reduces a lot..i know the circuit needs a buffer..will that solve this prob..
I am having the same problem after completing the layout and extraction....The pnoise analysis doesnt start because the pss fails to converge...
Can anyone help ??