Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
As part of my final project in Micro electronic devices, i would like to open a GDS file in virtuoso . I was trying to do the following steps:
1. create new library
2. in that library - File->import->Stream
In the end of that process I couldnt find any new layout to open.
Does anyone has an idea?
when the Stream import dialog opens Fill it in as:
Stream file: your .GDS file
Library: Your new library you created which will hold imported design
Top Level Cell: exact name of top level cell as it was designed prior to export to GDS file
Leave everything else blank. (do not attach technology library) It should work.
In reply to Kabal:
But let me be more specified. the gds file was created in The layout editor program and this file is a converted .dxf file that was created in Aoutocad 2013. The oroginal dxf file was constracted from a different layers but no cells...
So after the long introduction I am not quite sure that I get right what should I fill in the "Top level cell" tab.
Thanks in advanced
In reply to Graphene1:
Leave the Top Cell blank - it's not necessary to fill this in. If you don't specify it, it will import every structure (cell) from the file.
In reply to Andrew Beckett:
I left the top level cell tab blank as you said but I'm keep getting this error:
Targert library 'Graphene' is attached to the technology library 'cdsDefTechLib'. Therefore technology file is opened in read-only mode. Use a layer map file to continue.
What is the 'layer map file' ????
When you first created a library, it contained no real technology information. (It was attached to a default library). This is the problem.
I think you will see more information if you import the GDS2 file with the option "Generate Technology Information From Stream File" checked.
This will automatically generate a new technology library for you.
The layer map file is used to map the gds layer numbers to real layer names in your technology library.
From your description, I don't think you have a correct technology library set up. So you will not see anything
In reply to ColinSutlieff:
We do have a little progress. I checked the "Generate Technology Information From Stream File" box and the traslation was completed successfully with either no warnings or errors.
But..... the destination folder where the imported file needs to apear on, is still empty...
what did go wrong?
There should be a log file generated when you stream in - did you look at that to see what it did? It should tell you what it actually did - what cells it found, what was created and so on.
In the log file that was generated all the fielleds are '0'....
I guess that mean that nothing was created.
I think you mean library instead of "destination folder". No?
If I follow you correctly, I believe you now have a technology library.
If you re-read the GDS2, but this time turn off the "Generate Technology Information From Stream File" checkbox
Enter the stream file again, type a new name into which the design data should be read, and finally click on the "attach technology library" pull-down. You should see a list of valid libraries. Select the library that you created in the first run.
I hope that should do it.
In the "stream file" section, type in the name of the gds file
In the "Library" section, type in the new name of a library. This library name will be created by the translator.
For example, enter "mydesign". This field is a drop-down list but you can also enter text directly.
In the "attach Technology Library" field, click on the drop-down box and select the library that you created earlier (you said that this was successful).
If everything is set up correctly, after translation you will see a library called "mydesign".
"Mydesign" will contain the results of the translation The library will be attched to the technology library that you created earlier.
There should also be default layer colors defined so that when you open the layout viewsyou see colorful layout. If everything is yellow something has gone wrong.
Hope this helps
After importing the GDS file into virtuoso, I have not any error or warning, but two major problems:-> After displaying layout in the virtuoso, metal 1 is not displayed and all contacts with the metal1 layer do not appear in my imported layout.-> After the lvs, I receive a lot of warnings informing me that the transistors are not recognized.Does any one have any explanation? I really need your help please!
In reply to PhD Electronic:
Something went wrong, presumably!
Not enough info to go on - presumably the source data either didn't contain all the data, or the data was mapped onto the wrong Virtuoso layers.
This thread seems to have become a dumping ground for random unrelated stream import issues...
Here's what I've done:
I created a counter in schematic virtuoso, after that I created its symbol.
Whith ENCOUNTER i generated its layout, I routed it but I clould not do Timing delay I don't know why?
After I saved in gds file: Map File=> streamOut.map; Library Name=> DesigneLib; I checked "Uniquify Cell Names" and "White abstract information for LEF Macros"
To import it: file- import- stream then I just checked "Generate Technology Information From Stream File" then apply
Then here I have not any error or warning !
The problem then, is the fact that the layout isn't imported correctly since the metal1 and all the connections made of metal1 aren't displayed (or not imported).
In addition to that, while running the lvs, I obtain a lot of warnings informing me that all my transistors aren't recognized.
I don't know if I need to detail more ? that's exactly all what I did ! Can you please have any explanation.
Thanks for your patience!