Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I am working on IC614 with the techonology IBM7RF. After extracting models from layout by Assura QRC, I tried to do the post-simulation with that extraction. However, a long list of errors (SFE-23) come out in ADE with Spectre simulator. I couldn't find "input.scs" in the model folder of the technology. Could anyone help to locate this file? Or other ideas to fix this error? Thanks in advance.
The input.scs will be in the netlist directory used by ADE, not in the models from the technology. If you do Simulation->Netlist->Display in ADE it should show you the full path to the input.scs in the banner of the window.
Wherever ADE has it's project directory, on Setup->Simulator/Directory/Host , you'll then find under there cellName/simulator/viewName/netlist - it will be in there.
In reply to Andrew Beckett:
Thanks for your quick reply. I found "input.scs" in the directory you mentioned, and included it in ADE model libraries. Now turns to a new error:
FATAL (SFE-879): Recursive file include or library call: `/home/zheng072/simulation/NOT_test/spectre/schematic/netlist/input.scs'.
Any idea about this error please?
In reply to bjbit:
Adding the netlist as a model file makes no sense at all. When you set up a model file, it will add include statements to the input.scs into the input.scs - and so you'll get a recursive include, as you've found - hardly surprising.
You didn't really give much detail as to your original problem, but presumably you need to include the model files from your technology/PDK - and exactly what you need to include is probably documented in the PDK documentation.
I checked the content of input.scs and compared it with the extracted cellview. It seems that all undefined models come from analogLib. For example, undefined model "cmodel" is actually "pcapacitor" in the extraction. I don't know why the input.scs messes up the model name. Then I replaced the word "cmodel" with "pcapacitor" in input.scs, but same error said "pcapacitor" is also undefined model. At this point I am confused, since the schematic simulation with models from analogLib worked just fine, but fails to be defined here. Do I need to include a specific model file of analogLib in input.scs? So far I cannot find any .scs file in analogLib folder. Thanks for your time.
On the QRC Extraction form, go to the Netlisting tab, and ensure that you have Parasitic Capacitor Models and Parasitic Resistor Models set to either "Include As Comment" or "Do not include". You must have had it set to "Include Model".
That's useful if you want to provide a model to (say) scale the capacitance or resistance, but if you don't have such a model, you're best to leave them so that no model name is given. In this case, they'll get netlisted as resistor and capacitor in spectre.
Because I was reading on a handheld device I missed the end of the subject line - I might have realised that was what your problem was (your original posting was a bit confusing) - so my apologies for missing that.
Thanks a lot. The problem is solved now. You are right the setting in the netlisting tab is where caused the issue. Sorry about my confusing post at the beginning. I appreciate your helps.
You have told to set to "Include Model" on the QRC extraction form --> Netlisting tab to overcome the "recursive include error". How do I get to QRC Extraction form? Where can I find this ? Can you please let me know in detail.
The error I am getting is "Recursive file include or library call : ..... " Please help
In reply to KR1089:
I don't know what you're doing - the above example was specifically trying to solve a problem with QRC extraction - if you don't know where the QRC extraction form is, you're presumably not using QRC?
If your error is actually the recursive file include (which above was due to the person incorrectly trying to solve their original QRC issue), then it's because you have an include statement in spectre which is pointing back on itself. So please give the exact error message and also look at the top of the input.scs (the netlist you see in ADE when you do Simulation->Netlist->Display) and post any include statements here. That might help get to the bottom of what you've done wrong.
Ya, I am not using QRC extraction. I have a verilog code (FSM basically). The output of this FSM is fed to a interpolator design that I have designed in cadence virtuoso.
Everytime I try to run the simulation I get the following error shown below." End MS netlisting unsuccessful".
function simPostFunc redefined
Begin Incremental Netlisting Apr 21 00:09:28 2013
End netlisting Apr 21 00:09:28 2013
ERROR (OSSHNL): Error(s) found during netlisting. The netlist may be corrupt
or may not be produced at all.
To generate correct netlist, fix the errors and re-netlist.
Begin Digital Netlisting: Apr 21 00:09:28 2013
Begin Incremental Netlisting Apr 21 00:09:29 2013
INFO (VLOGNET-60): The stimulus name mapped table will not be printed in the
"testfixture.verilog" file. To print the stimulus name mapped table, set
simVerilogPrintStimulusNameMappingTable = t either in CIW or the .simrc file
before invoking Verilog netlister.
INFO (VLOGNET-62): Database internal net names will be printed for floating instance ports. To prevent
them from being printed, set simVerilogProcessNullPorts = t either in CIW or
the .simrc file.
INFO (VLOGNET-64): All cellviews in the design will be printed in the Netlist Configuration list.
If you want to print only those cellviews that need to be re-netlisted in the
list, set simVerilogIncrementalNetlistConfigList = t either in CIW or the
INFO (VLOGNET-66): Module ports will be printed without the port ranges. If you have split busses
across module ports you may get an incorrect netlist. To print module ports
with the port ranges, set simVerilogDropPortRange = nil either in CIW or the
INFO (VLOGNET-68): The initial state of stimulus of all inout pins is set to "z". To get inout
pins with initial state of "0", set hnlVerilogIOInitStimulusStr = "0"
either in CIW or the .simrc file.
INFO (VLOGNET-117): Re-netlisting the entire design.
INFO (VLOGNET-120): Using connection by order (implicit connections) for all the stopping cells.
INFO (VLOGNET-126): ---------- Beginning netlist configuration information ----------
CELL NAME VIEW NAME NOTE
--------- --------- ----
state symbol *Stopping View*
inverter symbol *Stopping View*
---------- End of netlist configuration information ----------
INFO (VLOGNET-80): The library 'pro', cell 'IDIOT', and view 'config' has been netlisted successfully.
End netlisting Apr 21 00:09:29 2013
WARNING (OSSHNL-338): hnlMaxLineLength was set to 'nil. Resetting maximum line length value to 72
End MS Netlisting: Apr 21 00:09:29 2013
Please let me know what am I doing worng.Any help would be appreciated.
Thanks a lot!!
Ah, so it has absolutely nothing to do with the post you appended to. That's helpful...
Debugging this without seeing the data is going to be hard, so please contact customer support.
Hi AndrewWhile netlisting an av_extracted view created using the QRC form, it gives negative 'w' values for parares.
Is there any fix for this?
In reply to Vysakh K:
Please read the forum guidelines - you're posting a question on the end of an old thread which only has a very loose connection to the original post. The guidelines ask you not to do that.