Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Hello all, I designed simple inverter using UMC65ll kit
and it passed successfully in DRC, LVS, and QRC. But extracted view of
this design isn't showing any metal layer instead schematic of
transistor is shown (figure attached). I have also ran QRC by setting
valid layers (LSW->edit->set valid layers->set all valid) but
problem still remains the same. Moreover, I am only using METAL1,
DIFFUSION and POLY1 layers. Versions are as follows.IC 614-06.14-512Assura 4.1 USR2 with EXT101 &MMSIM 0720.593How can I set up this to show layers in av_extracted view? Regards,
To see metal shapes in the extracted view is not necessarily requiredfor the function of the extracted view, storing devices, parameters, connectivity and parasitics.But the most likely reason if they do not appear is the missing "saveInterconnect"statement in your "extract.rul" file.
In reply to berndfi:
Thanks for your quick reply Berndfi. Ya view may not be required but once if we have an av_extract view then it becomes easy to trace out parasitics among layers for finding which layer is giving what value of prasitics.
I have included "saveInterconnect" in "extract.rul" file but still it's not showing any layers in av_extracted view. I have also attached my QRC log file here. Any other problem with this?
In reply to pavan7kumar:
In the "Create _save_layers" section of your log file there should be something like
"Copying Layer" or " Save recognition", which I can't see.
You got a bunch of warnings for "No library model" which I'm not sure where they are
related to, your "linbInti.il" or Assura?
Maybe you can try with "saveReconition" in the "extract.rul" file.
But my impression is that something goes wrong before it comes to writng the layers to the
I tried with "saveRecognition"but it doesnt work berndfi. In extract.rul I could only find "saveProperty" (in UMC65). But in GPDK180nm, I found lines such as
saveInterconnect((M6term "Metal6"))saveInterconnect((M5term "Metal5"))saveInterconnect((M4term "Metal4"))saveInterconnect((M3term "Metal3"))saveInterconnect((M2term "Metal2"))saveInterconnect((M1term "Metal1"))saveInterconnect((NSDterm "Nimp"))saveInterconnect((PSDterm "Pimp"))saveInterconnect((NWELLterm "Nwell"))saveInterconnect((CapMetal "CapMetal"))saveInterconnect((INDterm1 "INDdummy"))saveInterconnect((INDterm2 "INDdummy"))saveInterconnect((POLYterm "Poly"))saveInterconnect((JVARanode "JVAR1dummy"))saveInterconnect((Pwell "Pwell"))saveInterconnect((ISOPWELL "Nburied"))saveInterconnect((Nburied "Nburied"))
But i am not understanding how they mentioned layers and what it means to.
From library I have only used only tt_ll_rvt and it is not showing any warning about this. So i think this is not an issue.
>>But i am not understanding how they mentioned layers and what it means to.
Have you ever had a lookk into the documentation and tried to figure out how to apply
"saveInterconnect" or "saveRecognition" correct to your command rules.