I have been trying to build a schematic and the grids are not loading properly.
Under Tool, Options, Grids, I have set my grid to Decimal, Show Logic Grid - On, Size 0.025, Multiple 1.
But the console show my grid as size 0.024 1.
When I check the grid size I have dots at 0.012 pitch.???????
Can anyone enlighten as to why the grids are nothing like those required. And the components will not lock on the correct grid to make a clean schematic.
I have been told the grid has a default setting of 500. This gives a grid of 1/500 or 0.002".
There is a setting you can place in an environment variable to change the default to 1000. Giving a grid of 1/1000 or 0.001".