Google FeedBurner is phasing out its RSS-to-email subscription service. While we are currently working on the implementation of a new system, you may experience an interruption in your email subscription service.
Please stay tuned for further communications.
Is it possible to export a ISCF (Intel Schematic Checking Format) file from 17.2 Cadence/Allegro PCB Designer ?
Searching the internet I see demos with orcad capture, but this doesn't translate to 17.2 Cadence/Allegro.
Thanks for the help.
It worked for me after specifying the -temp folder location, as shown below:
Project file missing.Usage:geniscfnetlist -proj <project file name…
You can't generate the ISCF file from within Allegro, the only option is to output it from Capture ( which calls the geniscfnetlist program )
The Intel web site https://edc.intel.com/Tools/Design-Review/Default.aspx?language=en
states they will accept a ISCF or board file as input, so you can just send your board file
Hi David. Thank you for the reply.I can't figure out how to get my design into Capture. I do see in Allegro PCB Designer, Tools -> Library Tools -> Export -> Design Entry HDL to Orcad Capture.It asks for a 'Library' and 'Cell'. For library I select 'card_lib'. For cell I select 'card'. Hitting 'OK', the translation fails with a LCaptureConceptUI64 window indicating 'Encounteredan improper argument.'.A new window labelled 'Select symbols' appears. This looks like it wants me to select DesignEntryHDL symbols to export to a Capture library.Am I barking up the right tree?Thanks.
That conversion tool only converts schematic symbols, Cadence doesn't supply anything to convert Concept to OrCad schematics
It looks like in 17.4 you can generate an ISCF using geniscfnetlist.
Installing 17.4, and trying that I get:
=========Fatal error(s) found while reading Project filePlease correct the error(s) and rerun the programGenerate ISCF Netlist run on Jun 1 11:52:05 2021 2 errors detected=========
I can't find any output log describing the error.