In Allegro 15.2 I had this test thru via V30C16D.I would like to use this same via as a test point in 15.5.1 but I don't know how to set it up.Can someone help me with this?Thanks,Mihai
I have made this change.But when I try to go Testprep manual -> Add I get this message.E- Can't create probe: Pad Too Small
Check your "Min pad size" in the "General Parameters" tab.
I have changed the min pad size to 0.0 just like in 15.2.When I try to manually add a test point now it creates a test point, but does not replace the via with the right via that I assigned in the Tesprep Param->Padstack Selections.
At the bottom of the Padstack Selections tab, click on the "Load new existing vias" button. If you get multiple lines that you don't need, right-click on the line and select "Delete". Then check the "Replace vias" box, then enter the "BOTTOM Side Replacement", then check the "Enable" box.