Login, Licensing & Installation - Recent Threads

OrCAD X 25.1 installer error -2032: License request is still in queue

RS202607232220 — Sun, 11 Oct 2026 21:49:46 GMT

Hello,

I am installing OrCAD X 25.1 (OrCAD X Professional Plus, Free Student
license, POX300) on Windows. The installer fails at the last step,
"Installing: Downloading license", with this message:

"License file could not be downloaded. License request is still in queue.
Retry again in 120 seconds. (-2032)"

Setup then ends with: "Setup is completed but the license file could not
be downloaded. Run the installer again."

Details:
- In the Entitlement Management System the license status is "Activated"
(2026-07-23 to 2027-01-19).
- This is the only computer I use for this license.
- I have retried many times over several hours and re-ran the installer
with "Update License", with the same result.

Could someone from Cadence check why my license request is stuck in the
queue? Thank you.

license request queued

TR202608074547 — Sun, 11 Oct 2026 15:30:48 GMT

OrCAD X Academic License Stuck in "License Request Queued" After Reinstallation

Hi everyone,

I have a six-month OrCAD X Professional academic license that was working correctly on my laptop a few months ago. The application eventually stopped working, so I reinstalled it, but I am still unable to use OrCAD Capture.

My Cadence Entitlement Management System shows my product entitlement as Active, but my registered device remains at "License Request Queued", and the last validated date is shown as NA.

When I launch OrCAD Capture or Capture CIS, I receive error ORCOMM-12006, stating that the installation is configured for Single User License mode and that the current user is not registered for OrCAD Capture or the registration has expired. I also receive internal error -2120.

When I run the installer to update the license, it retries approximately 15 times and then finishes without resolving the issue. The installer does not prompt me to sign in to my Cadence account; it goes directly to the terms and conditions and then offers options to update the license or reinstall the software.

I have already reinstalled OrCAD, but the device status remains queued and the same errors persist.

Has anyone encountered this issue with an academic entitlement? Is there a way to restore the Single User License registration, or does Cadence need to resolve the pending device request?

Thanks for your help.

Orcad X Installation Issue

EN202608242419 — Mon, 24 Aug 2026 10:16:23 GMT

I'm trying to install the Orcad X Professional through installer OrCADXInstall.exe that I installed from Entitlement Management System, but I'm getting Cannot download files because of the following error: The remote server returned an error: (404) Not Found.

Note: I'm a trial user

Thank you.

RE: Orcad X Installation Issue

JuanCR — Tue, 25 Aug 2026 16:00:14 GMT

Hi. There a few things that could explain this:

- The server may be overloaded or requires a restart.
- Cadence download sites undergo weekly maintenance. If your download fails consistently at a specific time, it may be due to a planned window.

Can you tell us what steps are you following to perform the download? It doesn't seem like you're using the Download Manager.

RE: Licensing Issue: Almost working, but not quite

AO202603103814 — Tue, 10 Mar 2026 07:59:12 GMT

If the vendor daemon fails, the server may say UP but no licenses are actually available.

Licensing Issue: Almost working, but not quite

pmckeever — Fri, 11 Jul 2025 15:39:10 GMT

I am attempting to configure and use OrCad X after an install. I am using a dongle key for authentication, and a locally run license server for license management. My company is just trying out this license while we decide if it's a good toolset for us, hence why we just got one dongle. We do NOT use cloud authentication or any other form of licensing. When the license server is not running, I cannot launch any of the applications in the OrCad X suite, as expected, but even with the Cadence License Server running, and the dongle key inserted, I still see "license expired" on the start page. The license is not expired (I checked the license file and it's not expiring until 2026), the dongle drivers are up-to-date, and I followed the instructions precisely on the Cadence website. Has anyone dealt with similar issues? I'm actually able to launch and interact with Capture CIS, but it's very clearly not happy about my license. Can't paste picture of the server status dialog box cuz the webpage keeps giving me an error when i try to, but it says "up" and the flexid matches the dongle flex id.

Can we install the OrCAD / Allegro version 17.2 in PC which has Windows 11 Pro OS

RohitRohan — Thu, 22 Aug 2024 09:14:43 GMT

Hai Community,

I have a PC for which the Window 11 Pro OS is installed and I am looking to install the OrCAD / Allegro 17.2 version, does it the OrCAD / Allegro 17.2 version run on Windows 11 Professional PC.

Regards,

Rohit Rohan

RE: Can we install the OrCAD / Allegro version 17.2 in PC which has Windows 11 Pro OS

SG202412105143 — Tue, 25 Nov 2025 13:40:17 GMT

Yes .you can. But you have to have software with you. Cadence does not not support for downloading older version.

RE: Silent install

RL202509239044 — Tue, 07 Oct 2025 13:37:17 GMT

it's a OrCAD X Professional Plus activated with an academic account

I have tried the !quiet=./silentinstall.in because nothing worked, but I don't have a disk file, just an exe installer.

Silent install

RL202509239044 — Tue, 07 Oct 2025 13:21:41 GMT

Hello,

I have an education license for OrCAD and would like to install it silently thought a command. I have try :

./OrCADXInstall.exe /s
./OrCADXInstall.exe /s /v"/qn"
./OrCADXInstall.exe !quiet=./silentinstall.ini (as per https://resources.pcb.cadence.com/blog/2025-client-orcad-x-installation )
./OrCADXInstall.exe /VERYSILENT

Can anyone help ? Or know where to find a more completed documentation for the installation ?

RE: Silent install

Prabal — Tue, 07 Oct 2025 13:27:29 GMT

is this a SUL version of OrCAD that you have? Please confirm. !quiet=./silentinstall.ini is available with full enterprise solution of SPB 24.1 release in DISK1. Also, it works with setup.exe also in DISK1

RE: Why are things installing that I can't use due to the license we bought?

Jeet — Thu, 21 Aug 2025 10:15:33 GMT

Which license you are using ?

Why are things installing that I can't use due to the license we bought?

MS202503286724 — Tue, 12 Aug 2025 14:07:54 GMT

We recently bought a seat of OrCadX, just the plain, no-frills version, but after installation there are lots of programs showing that we can't run due to our license.

Why did it install everything even though we only have access to a small fraction of it? What are we supposed to be able to see after installation?

Another issue I'm facing is that the software doesn't seem to have the ability to see network shares, only local directories unless I type the "\\" and the name of the network address.

Is this normal, or is the installation even more fouled up?

My company backs up several times a day, and requires things like the library, and workspaces to be on network locations, so it can back it up.

I see a library explorer but that isn't able to be used? How does one see what is in the library outside of being in the layout software? Is there any way?

This separate padstack setup is the hardest thing to get my head around, why aren't they part of the footprint? Are you able to have footprint libraries divided into folders so you don't need to weed through everything any time you want to configure a footprint?

I used to use OrCAD CIS in conjunction with a PADS layout package and it seemed exponentially easier doing that compared to this.Is there an easier way to do this?

Any help would be greatly appreciated.

Our anti-virus just flagged \Cadence\SPB_24.1\tools\bin\repln.exe

MS202503286724 — Tue, 19 Aug 2025 16:22:34 GMT

It says it contains Trojan.GenericKD.76242836

Any suggestions?

RE: Our anti-virus just flagged \Cadence\SPB_24.1\tools\bin\repln.exe

Prabal — Tue, 19 Aug 2025 16:27:07 GMT

This repln.exe will be handled in future releases to avoid anti-virus S/Ws flagging them as malicious. For now, these exes can be safely whitelisted.

Hope this helps.

RE: Why are things installing that I can't use due to the license we bought?

MS202503286724 — Tue, 19 Aug 2025 16:12:19 GMT

24.1, installed in June of this year

The start menu shows all of these entries:

---Cadence OrCAD X and Allegro X 24.1 ---
Capture CIS 24.1
Design Entry HDL 24.1
FPGA System Planner 24.1
OrCAD X PCB Presto 24.1
PCB Editor 24.1
Project Manager 24.1
PSpice AD 24.1
PSpice Advanced Analysis 24.1
System Architect 24.1
System Capture 24.1

---Cadence PCB Utilities 24.1---
Design Entry HDL Rules Checker 24.1
DesignTrue DFM Rule Aggregator 24.1
DFA Spreadsheet Editor 24.1
DFA Symbol Update 24.1
Library Explorer 24.1
Model Integrity 24.1
Padstack Editor 24.1
PCB DB Doctor 24.1
PSpice Magnetic Parts Editor 24.1
PSpice Model Editor 24.1
PSpice Simulation Manager 24.1
PSpice Stimulus Editor 24.1
SigWave 24.1
SigXplorer 24.1

The only ones that run are those I've Bolded & Italicized

I figured out there is a setting that defaults the file access to be very limited and to not allow the use of Windows File Manager. After I changed that I was able to see the directories, but then I found out that Orcad doesn't like spaces in the directory names. It is 2025, right?

Why did the installation add all these shortcuts to the start menu when I can't use them?

RE: Why are things installing that I can't use due to the license we bought?

Jeet — Thu, 14 Aug 2025 13:31:57 GMT

To clarify, could you please provide the following details:

1. What version of OrCAD X you have installed on your system?
2. Which specific programs or features within OrCAD X that you are having trouble accessing or viewing?
3. Where exactly are you using the double backslash (\\) notation within the OrCAD X software?

Problem after installing Cadence OrCAD and Allegro 22.1

HASAN2024 — Mon, 17 Mar 2025 10:39:35 GMT

Hi there,

I am having trouble to installing the cadence 22.1. What steps I followed are,

1.Run “setup.exe” from extracted folder C:\Software\Base_SPB22.10.000_wint_1of3\Disk1 ( but my folder is in my desktop )

2. After some time ^setup needs the next Disk* menu pop ups and I select the Disk2 folder

3. There was no request for Disk3.

4. I have a company owned license, so I went to *Go to Start → All Programs → Cadence XXXX→ License Client Configuration Utility*

5. Specify the port license server

6. Click to the finish,

But if I open my Cadence 22.1, it shows as follows,

Symbols are absent,

If I click one the error massage said,

Kindly help me to solve it soon.

Cadence License Manager without full application

JM202501154052 — Mon, 20 Jan 2025 14:49:57 GMT

Is it possible to install the Cadence License Manager on a dedicated licensing server without installing the full application? We'd like to have a lightweight VM serve out the licensing and just point the workstations to it, but I've been told we have to do a full installation on the server. Is this correct?

Can we install the OrCAD X Trail in Linux PC

RohitRohan — Thu, 15 Aug 2024 16:29:43 GMT

Hai Community,

I have one doubt, can we install the OrCAD X Trail version in the Linux Operating System PC.

If yes, which is the version of Linus the OrCAD X Trail version Supports?

Regards,

Rohit Rohan

Error on installer "bad conversion" (-2048)

ejc787 — Sun, 18 Feb 2024 20:35:57 GMT

Not sure what's happening here. Error "bad conversion" (-2048) while trying to log into installer.

Tried on two separate systems.

I have admin rights.

I am not on a proxy network or VPN.

Any help would be most appreciated.

Thanks,
Eric

Some comments regarding Cadence (OrCAD/Allegro) Documentation...

Ulf K — Wed, 17 Jan 2024 16:21:51 GMT

Since this is not really a support request but merely some comments and since I know that

people from Cadence sometimes browses these forum I thaught that I should post some opinons here...

Having access to a multitude of documentations is excellent but why does Cadence use "Dark Mode" when creating the documentation?

I use this mode when working but for printing out a .PDF or part of it - the dark mode depletes all toner in my laser printer.

Dark mode is fine for displays - but NOT for printed material.

Why does Cadence use abbreviations when naming documentation? A few years ago I noticed the same

thing with Keysight (RF simulation software) and asked why they still used the 8.3 notation and suggested

using understandable (longer) file names. Keysight acknowledged it and changed their naming.

I therefore suggest that Cadence consider doing the same.