---- START: WARNING ---- SAMPLE_PERIOD for model.ICE_rear.powertrain_gse will be ignored. ---- END: WARNING ---- acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... command: ! command: preferences/solver=CXX command: preferences/list,status=on PREFERENCES: SIMFAIL = NOSTOPCF Contact Geometry Library = (not loaded) Thread Count = 1 Library Search Path = Not Set Status Message = On Solverbias = CXX (C++ Solver) command: deactivate/motion,range=2,8 Deactivated model.testrig.motion_rot_z, force/torque values will be zero in function-expression references. Deactivated model.testrig.motion_rot_y, force/torque values will be zero in function-expression references. Deactivated model.testrig.motion_rot_x, force/torque values will be zero in function-expression references. Deactivated model.testrig.motion_trans_z, force/torque values will be zero in function-expression references. Deactivated model.testrig.motion_trans_y, force/torque values will be zero in function-expression references. Deactivated model.testrig.motion_trans_x, force/torque values will be zero in function-expression references. command: control/routine=abgTire::con901,func=user(901,75,29,35,1,2) command: control/routine=abgTire::con901,func=user(901,79,30,36,1,4) command: control/routine=abgTire::con901,func=user(901,84,38,44,1,6) command: control/routine=abgTire::con901,func=user(901,88,39,45,1,8) command: ! command: control/routine=acarSDM::con952,function=user(952,345,3,4,5) command: simulate/statics Begin Static Solution TIRE ID: 2 TYR910 -> Pacejka 2002 Tire Model Using 2D Road One point Contact TIRE ID: 4 TYR910 -> Pacejka 2002 Tire Model Using 2D Road One point Contact TIRE ID: 6 TYR910 -> Pacejka 2002 Tire Model Using 2D Road One point Contact TIRE ID: 8 TYR910 -> Pacejka 2002 Tire Model Using 2D Road One point Contact STATICS: Original static solver will be used with the Sparse linear solver. acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... Static Solution converged in 8 iterations Residual imbalance is less than 1.11148E-06 End Static Solution Simulate status=0 command: !Perform SVC Analysis command: control/routine=apreSOL::con1111, function=user(1111,-1,0,0,0,0,937,938,917,920) SVC>>flt_svccsb: STARTING FULL-VEHICLE SVC CALCULATIONS. command: sim/stat Begin Static Solution STATICS: Original static solver will be used with the Sparse linear solver. Static Solution converged in 3 iterations Residual imbalance is less than 8.36862E-09 End Static Solution Simulate status=0 SVC>>flt_svccsb: COMPUTING FRONT COMPLIANCE MATRIX. SVC>>flt_svccsb: COMPUTING REAR COMPLIANCE MATRIX. SVC>>flt_svccsb: COMPUTING TIRE COMPLIANCE MATRIX. SVC>>flt_svccsb: USING THESE TIRE STIFFNESSES: 1.00000E+02 1.00000E+02 2.70413E+02 0.00000E+00 0.00000E+00 0.00000E+00 1.00000E+02 0.00000E+00 2.70202E+02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.70391E+02 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.70223E+02 0.00000E+00 0.00000E+00 0.00000E+00 SVC>>flt_svccsb: REMOVING BODY DOF. SVC>>flt_svccsb: REMOVING FRONT TIRE STIFFNESSES. SVC>>flt_svccsb: REMOVING REAR TIRE STIFFNESSES. SVC>>flt_svccsb: COMPUTING GENERAL SVCS. SVC>>flt_svccsb: COMPUTING FRONT SVCS. SVC>>flt_svccsb: COMPUTING REAR SVCS. SVC>>flt_svccsb: WRITING OUTPUT FILES. SVC>>flt_svccsb: UPDATING vehicle_parameters_ARRAY_front. command: array/917,NUMBERS=19655.77,750.12,2565.07,1.00,0.55,1.00,363.11,270.41,270.20 SVC>>flt_svccsb: UPDATING vehicle_parameters_ARRAY_rear. command: array/920,NUMBERS=19655.77,750.12,2565.07,0.00,0.45,1.00,360.42,270.39,270.22 command: sim/stat Begin Static Solution STATICS: Original static solver will be used with the Sparse linear solver. Static Solution converged in 1 iterations Residual imbalance is less than 6.27103E-07 End Static Solution Simulate status=0 SVC>>flt_svccsb: RETURNING TO ADAMS COMMAND FILE. command: control/routine=apreSOL::con1149, function=user(1149,916) command: ma/1192,QP=1448.17,0.00,-420.35 command: ma/985,QP=86.53,0.00,-720.35,ZP=96.53,0.00,-720.35 command: ma/1193,QP=1448.17,0.00,-420.35,ZP=1458.17,0.00,-420.35 command: ma/1197,QP=1448.17,0.00,-420.35 command: ma/1194,QP=1448.17,0.00,-420.35,ZP=1448.17,10.00,-420.35 command: ma/1198,QP=1448.17,0.00,-420.35,ZP=1448.17,10.00,-420.35 command: ma/1200,QP=1448.17,0.00,-420.35 command: ma/1199,QP=1448.17,0.00,-420.35 command: ma/1201,QP=1448.17,0.00,-420.35 command: ma/1203,QP=1448.17,0.00,-420.35 command: ma/1202,QP=1448.17,0.00,-420.35 command: ma/1204,QP=1448.17,0.00,-420.35 command: ma/1206,QP=1448.17,0.00,-420.35 command: ma/1205,QP=1448.17,0.00,-420.35,ZP=1448.17,10.00,-420.35 command: ma/1207,QP=1448.17,0.00,-420.35,ZP=1448.17,10.00,-420.35 command: ma/1080,QP=1448.17,0.00,-420.35,ZP=1458.17,0.00,-420.35 command: ma/1208,QP=1448.17,0.00,-420.35,ZP=1458.17,0.00,-420.35 command: variable/285, function=0 command: output/nosep command: activate/motion, range=2 ,8 command: deactivate/jprim, range=10 ,11 Deactivated model.testrig.josinl_body_stake, force/torque values will be zero in function-expression references. Deactivated model.testrig.josper_yaw_stake, force/torque values will be zero in function-expression references. command: ! command: ! command: control/routine=acarSDM::con952,function=user(952) command: ! command: ! command: simulate/statics, duration=1, steps=100 Begin Simulation ****** Performing Quasi-Static Simulation ****** acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... Simulation Step Function Cumulative CPU Slvr Time Size Evaluations Steps Taken time type ___________ ___________ ___________ ___________ ________ ___ 0.00000E+00 0.00000E+00 0 0 1.25 1 1.00000E-01 1.00000E-02 19 11 1.41 1 2.00000E-01 1.00000E-02 29 21 1.55 1 3.00000E-01 1.00000E-02 39 31 1.72 1 4.00000E-01 1.00000E-02 49 41 1.84 1 5.00000E-01 1.00000E-02 59 51 1.98 1 acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. 6.00000E-01 1.00000E-02 73 61 2.42 1 7.00000E-01 1.00000E-02 83 71 2.55 1 acar/acm_cmat **** Error: Compliance matrix calculation failed. 8.00000E-01 1.00000E-02 93 81 2.73 1 acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. acar/acm_cmat **** Error: Compliance matrix calculation failed. 9.00000E-01 1.00000E-02 108 91 3.20 1 1.00000E+00 1.00000E-02 118 101 3.42 1 End Simulation Simulate status=0 command: simulate/statics Begin Static Solution STATICS: Original static solver will be used with the Sparse linear solver. Static Solution converged in 1 iterations Residual imbalance is less than 8.88072E-07 End Static Solution Simulate status=0 command: ! command: save/system, file=xxcarxx_9422792.sav acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... acar/ac_scc_init Reading ARRAY parameters using the Adams Car array statement definitions. acar/ac_scc_init Checking ARRAY parameters... command: ! command: ! roll motion test left turn then right turn command: reload/system, file=xxcarxx_9422792.sav, out=spmm_trial11_roll_spmm Current simulation terminated due to RELOAD command. The following line is a separator for the Adams Solver (C++) message file. <++> OS-environment variable MSC_ADAMS_OPENMP=ON Enforces Adams Solver (C++) to enable or disable OpenMP usage. Values are ON or OFF. RELOAD from xxcarxx_9422792.sav successful. System time is now 1 command: control/routine=acarSDM::con952,function=user(952,345,3,5) command: deactivate/motion, id=2 Deactivated model.testrig.motion_trans_z, force/torque values will be zero in function-expression references. command: deactivate/motion, id=7 Deactivated model.testrig.motion_rot_y, force/torque values will be zero in function-expression references. command: motion/8, function = 2.0 * dtor * shf(time,0,1,360d,0,0) + varval(292) command: simulate/statics, duration=1.0, steps=100 Begin Simulation ****** Performing Quasi-Static Simulation ****** ---- START: ERROR ---- Number of new element states 0 doesn't match number of old ones, 1. Simulation time is 1.000000000E+00 Simulation time is 1.000000000E+00 ---- END: ERROR ---- Quasi Static Solution stopped. End Simulation Simulate status=-124 command: motion/8, function = varval(292) command: ! command: control/routine=acarSDM::con952,function=user(952) command: activate/motion, id=2 command: activate/motion, id=7 command: ! command: ! command: stop Termination status=0 Terminating Adams Car usersubs... Finished ----- Elapsed time = 1.85s, CPU time = 1.80s, 97.34%