// Generated for: spectre
// Generated on: Sep 22 01:19:44 2011
// Design library name: PASSIVE_MIXER
// Design cell name: MIX_MODEL
// Design view name: schematic
simulator lang=spectre
global 0
include "/home/manas/Cadence_install/srv/install/cadence/IC5141/tools/dfII/samples/artist/ahdlLib/quantity.spectre"
parameters frf=2.4G prf=-50

// Library name: PASSIVE_MIXER
// Cell name: MIX_MODEL
// View name: schematic
PORT0 (net19 0) port r=50 type=sine freq=frf dbm=prf pacmag=1 \
        fundname="frf"
PORT1 (net23 0) port r=50 num=2 type=dc
PORT2 (net21 0) port r=50 num=3 type=sine freq=2.3G dbm=10 fundname="frf1"
I8 (net19 net21 net23) mixer gain=20 plo=10 rin=50 rout=50 rlo=50 ip2=5 \
        ip3=13 nf=0 isolation_LO2IN=50 isolation_LO2OUT=50 \
        isolation_IN2OUT=50
simulatorOptions options reltol=1e-3 vabstol=1e-6 iabstol=1e-12 temp=27 \
    tnom=27 scalem=1.0 scale=1.0 gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 \
    digits=5 cols=80 pivrel=1e-3 sensfile="../psf/sens.output" \
    checklimitdest=psf 
sweeppss  sweep  param=prf  start=-70  stop=8  step=5  {
  pss  pss  fund=100M  harms=50  errpreset=moderate
+    tstabmethod=gear2only  maxacfreq=30G  annotate=status

  pac  pac  start=2.425G  maxsideband=50  annotate=status
}

modelParameter info what=models where=rawfile
element info what=inst where=rawfile
outputParameter info what=output where=rawfile
designParamVals info what=parameters where=rawfile
primitives info what=primitives where=rawfile
subckts info what=subckts  where=rawfile
saveOptions options save=allpub
ahdl_include "/home/manas/Cadence_install/srv/install/cadence/IC5141/tools/dfII/samples/artist/rfLib/mixer/veriloga/veriloga.va"