*Info*    Exporting services from client ... 

*Info*    Client has finished starting ... 



*Info*    Configuring the session ...

	Library      = SAR_ADC
	Cell         = SAR_tb
	View         = schematic
	Simulator    = spectre
	State Path   = $AXL_SETUPDB_DIR/test_states
	State Name   = ExplorerRun.0
	Results DB   = /local/data0/SA/temp/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0.rdb
	Results Dir  = /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0/1/SAR_ADC:SAR_tb:1
	Results Loc  = /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro
	Project Dir  = /cs/home/asgaris/simulation
	Setup DB loc = /local/data0/SA/temp/SAR_test/SAR_tb/maestro
	File Encoding = 0


variable oasisVariableValue redefined
variable persistNewList redefined
*Info*    The simulation mode in Spectre has been changed from
          'interactive' to 'batch' mode because ICLP.


*Info*    The auto suspension is disabled.






*Info*    Run start for Point ID (0 1) on testbench [
          SAR_ADC:SAR_tb:1 ].

Resetting statistical vars

*Info*    Setting parameter values ...

Setting var ITERATION = "1"
Setting var TSTOP = "0.052475"
Setting var Tperiod = "1u"
Setting var delay = "275e-6"
Setting var fclk = "200000"
Setting var fsample = "10k"
Setting var numPoints = "512"
Setting var numberofbits = "10"
Setting var period = "1/fsample"
Setting var quanta = "VDD/(2**numberofbits)"
Setting var t2 = "3m"
Setting temp(T) = 27
Setting var tone = "127"
Setting var v1 = "500m"
Setting var v2 = "700m"
Setting var validperiod = "13*period"
Setting var vin = "550m"

*Info*    Netlist Directory =
          /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0/1/SAR_ADC:SAR_tb:1/netlist


*Info*    Data Directory    =
          /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0/1/SAR_ADC:SAR_tb:1


*Info*    Creating Netlist for Point ID (0 1)

generate netlist...
Begin Incremental Netlisting May 12 10:27:46 2022
ERROR (OSSHNL-109): The cellview 'SAR_ADC/SAR_tb/schematic' has been modified since the last extraction. Validate
that the schematic is correct and run Check and Save to correct this error.

End netlisting May 12 10:27:46 2022
ERROR (OSSHNL-514): Netlist generation failed because of the errors reported above. The netlist might not have been generated at all, or the generated netlist could be corrupt. Fix the reported errors and regenerate the netlist.
      ...unsuccessful.

*Error*   Error ID  = 5012
*Error*   Error Msg = Failed to create netlist.









*Info*    Run start for Point ID (0 1) on testbench [
          SAR_ADC:SAR_tb:1 ].

Resetting statistical vars

*Info*    Setting parameter values ...

Setting var ITERATION = "1"
Setting var TSTOP = "0.052475"
Setting var Tperiod = "1u"
Setting var delay = "275e-6"
Setting var fclk = "200000"
Setting var fsample = "10k"
Setting var numPoints = "512"
Setting var numberofbits = "10"
Setting var period = "1/fsample"
Setting var quanta = "VDD/(2**numberofbits)"
Setting var t2 = "3m"
Setting temp(T) = 27
Setting var tone = "127"
Setting var v1 = "500m"
Setting var v2 = "700m"
Setting var validperiod = "13*period"
Setting var vin = "550m"

*Info*    Netlist Directory =
          /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0/1/SAR_ADC:SAR_tb:1/netlist


*Info*    Data Directory    =
          /eecs/home/asgaris/simulation/SAR_test/SAR_tb/maestro/results/maestro/ExplorerRun.0/1/SAR_ADC:SAR_tb:1


*Info*    Creating Netlist for Point ID (0 1)

generate netlist...
Begin Incremental Netlisting May 12 10:27:56 2022
ERROR (OSSHNL-109): The cellview 'SAR_ADC/SAR_tb/schematic' has been modified since the last extraction. Validate
that the schematic is correct and run Check and Save to correct this error.

End netlisting May 12 10:27:56 2022
ERROR (OSSHNL-514): Netlist generation failed because of the errors reported above. The netlist might not have been generated at all, or the generated netlist could be corrupt. Fix the reported errors and regenerate the netlist.
      ...unsuccessful.

*Error*   Error ID  = 5012
*Error*   Error Msg = Failed to create netlist.




Simulation design variables differ from those on the cellView,
they have been saved in the file "/tmp/saved-design-variables".
To save future changes, copy variables to cellView before exiting.