Cadence Quantus Extraction - 64-bit Parasitic Extractor - Version 20.1.2-p025 Thu Sep 3 13:54:09 PDT 2020 -------------------------------------------------------------------------------------------------------------- Copyright 2020 Cadence Design Systems, Inc. INFO (EXTQRCXOPT-243) : For Assura inputs, if the "output_setup -directory_name" option was not specified, it is automatically set to the input directory. INFO (LBRCXU-108): Starting /CMC/tools/cadence/ASSURA04.16.111-618_lnx86/tools.lnx86/assura/bin/avRCXxref /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/__qrc.rcx_cmd -useRunName @(#)$CDS: avRCXxref_64 version av4.1:Production:dfII6.1.8-64b:IC6.1.8-64b.500.17 03/26/2021 10:22 (sjfhw780) $ sub-version 4.1_USR6_HF11, integ signature 2021-03-26-0950 run on 1850-CO7CMC-008 at Tue Mar 28 15:09:03 2023 Reading rsf INFO (LBRCXU-114): Finished /CMC/tools/cadence/ASSURA04.16.111-618_lnx86/tools.lnx86/assura/bin/avRCXxref INFO (LBRCXM-630): Starting extraction: Tue Mar 28 15:09:04 2023 Forking: capgen -techdir /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical -inc /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3.elf -lvs /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3.xcn -p2lvs /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical/qrcTechFile -reseqn -p poly_conn,allGate,Oxide -canonical_res_caps -length_units meters -exclude_gate_res -cap_ground_layer psubstrate /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3 INFO (LBMISC-215205): *** Cadence Quantus Extraction Techgen -trans VERSION 20.1.2 Linux 64 bit - (Thu Sep 3 13:54:09 PDT 2020) *** INFO (CAPGEN-41199): Techgen -trans results will be written to directory: /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3 INFO (CAPGEN-41737): Lvs connect layers Bondpad CapMetal ind10 ind11 npn_emit pnp_emit are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by ind10 layers SPK_T?479 are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by ind11 layers SPRL_T?478 are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by nb_tap layers Nburied are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by ndiff_conn layers ntap are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by nwell_conn layers nb_tap are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by pdiff_conn layers ptap are not mapped in layer_setup file INFO (CAPGEN-41804): Lvs stamped by ptap layers pwell are not mapped in layer_setup file WARNING (RCXSPIC-27104): p2lvsfile in tech directory does not have resistance temperature coefficients (TC1, TC2). ?temperature is ignored rcxspice took 0.05 user, 0.09 sys, 1.00 elapsed, 5164.0 kbytes Successfully created RCX script '/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx.sh' INFO (LBRCXM-581): Checked out '1' license(s) of QTS300 20.10 INFO (LBRCXM-608): Executing command /bin/ksh /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx.sh ##======================================================= ##ADD_EXPLICIT_VIAS=N ##ADD_BULK_TERMINAL=N ##AGDS_FILE=/dev/null ##AGDS_LAYER_MAP_FILE=/dev/null ##HCCI_DEV_PROP_FILE=/dev/null ##AGDS_SPICE_FILE=/dev/null ##AGDS_TEXT_LAYERS= ##ARRAY_VIAS_SPACING= ##ASSURA_RUN_DIR=/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS ##ASSURA_RUN_NAME=NOR3_LVS_run_3 ##BLACK_BOX_CELLS=/dev/null ##BREAK_WIDTH= ##CAP_COUPLING_FACTOR=1.0 ##CAP_EXTRACT_MODE=coupled ##CAP_GROUND=Vss ##CAP_MODELS=no ##DANGLINGR=N ##DENSITY_CHECK_METHOD=P ##DELETE_OUTPUT_FILE=N ##DEVICE_FINGER_DELIMITER='@' ##DF2=N ##DRACULA_RUN_DIR= ##DRACULA_RUN_NAME= ##ENABLESENSITIVITYEXTRACTION=N ##EXCLUDE_FLOAT_LIMIT= ##EXCLUDE_FLOAT_DECOPULING_FACTOR= ##EXCLUDE_FLOATING_NETS=N ##EXCLUDE_NETS_REDUCERC=/dev/null ##EXCLUDE_SELF_CAPS=Y ##IGNORE_GATE_DIFFUSION_FRINGING_CAP=Y ##EXTRACT=both ##EXTRACT_MOS_DIFFUSION_AP=N ##EXTRACT_MOS_DIFFUSION_HIGH= ##EXTRACT_MOS_DIFFUSION_RES=N ##FILTER_SIZE=2.0 ##FIXED_NETS_FILE=/dev/null ##FMAX= ##FRACTURE_LENGTH_UNITS=MICRONS ##FREQUENCY_FILE=/dev/null ##GROUND_NETS= ##GROUND_NETS_FILE=/dev/null ##GROUND_SUBSTRATE_FLOATING_NETS=N ##HCCI_DEV_PROP=7 ##HCCI_INST_PROP=6 ##HCCI_NET_PROP=5 ##HCCI_RULE_FILE= ##HCCI_RUN_DIR= ##HCCI_RUN_NAME= ##HEADER_FILE=/dev/null ##HIERARCHY_DELIMITER='/' ##OUTPUT_HIERARCHY_DELIMITER='/' ##HRCX_CELLS_FILE=/dev/null ##IMPORT_GLOBALS=Y ##LADDER_NETWORK=N ##LVS_SOURCE=assura ##M_FACTORR= ##M_FACTORW=N ##MACRO_CELL=Y ##MAX_FRACTURE_LENGTH=infinite ##MAX_SIGNALS= ##MERGE_PARALLEL_R=N ##MERGE_PARALLEL_VIA=N ##MINC=1e-17 ##MINC_BY_PERCENTAGE=0.1 ##MINR=0.001 ##NET_NAME_SPACE=layout ##NETS_FILE=/dev/null ##OUTPUT=/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx.sp ##OUTPUT_NET_NAME_SPACE=schematic ##PARASITIC_BLOCKING_DEVICE_CELLS_TYPE=gray ##PARASITIC_CAP_MODELS=no ##PARASITIC_RES_MODELS=comment ##PARASITIC_RES_LENGTH=N ##PARASITIC_RES_WIDTH=N ##PARASITIC_RES_WIDTH_DRAWN=N ##PARASITIC_RES_UNIT=N ##PARTIAL_CAP_BLOCKING=N ##PEEC=N ##PIN_ORDER_FILE=/dev/null ##PIPE_ADVGEN= ##PIPE_SPICE2DB= ##POWER_NETS= ##POWER_NETS_FILE=/dev/null ##RC_FREQUENCY= ##RCXDIR=/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3 ##RCXFS_HIGH=N ##RCXFS_NETS_FILE= ##RCXFS_TYPE=none ##RCXFS_CUTOFF_DISTANCE= ##RCXFS_CUTOFF_DISTANCE= ##RCXFS_CUTOFF_DISTANCE= ##RCXFS_CUTOFF_DISTANCE= ##RCXFS_CUTOFF_DISTANCE= ##RCXFS_VIA_OFF=N ##REDUCERC=N ##REGION_LIMIT= ##RES_MODELS=no ##RISE_TIME= ##SAVE_FILL_SHAPES=N ##SINGLE_CAP_EDSPF=N ##SHOW_DIODES=N ##SKIN_FREQUENCY= ##SPEF=N ##SPEF_UNITS= ##SPLIT_PINS=N ##FORCE_SUBCELL_PIN_ORDERS=N ##SPLIT_PINS_DISTANCE= ##SUB_NODE_CHAR='#' ##SUBSTRATE_PROFILE=/dev/null ##SUBSTRATE_STAMPING_OFF=N ##TEMPDIR=/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx_temp ##TEMPERATURE=25.0 ##TYPE=full ##USER_REGION=/dev/null ##VARIANT_CELL_FILE=/dev/null ##VIA_EFFECT_OFF=N ##VIRTUAL_FILL= ##XREF=/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/NOR3_LVS_run_3.gnx,/home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/NOR3_LVS_run_3.gdx ##XY_COORDINATES=C,R,D,M,Q,X ##======================================================= CASE_SENSITIVE=TRUE export CASE_SENSITIVE QRC_MOS_LW_PRECISION=y export QRC_MOS_LW_PRECISION TEMPDIR=`setTempDir /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx_temp` setTempDir /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3/rcx_temp export TEMPDIR DEVICE_FINGER_DELIMITER='@' HIERARCHY_DELIMITER='/' OUTPUT_HIERARCHY_DELIMITER='/' cd /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3 cat < caps2dversion * caps2d version: 10 ENDCAT cat < flattransUnit.info meters ENDCAT QRC=Y export QRC cat < topcellxcn.info /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3.xcn ENDCAT #==========================================================# # Generate RCX input data from Assura LVS database #==========================================================# GOALIE2DIR=/CMC/tools/cadence/QUANTUS20.12.000_lnx86/tools.lnx86/extraction/bin export GOALIE2DIR vdbToRcx /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS \ NOR3_LVS_run_3 -unit meters -- -V1 -H satfile -r \ /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS/NOR3_LVS_run_3.xcn \ -xgl -sv @(#)$CDS: vdbToRcx_64 version av4.1:Production:dfII6.1.8-64b:IC6.1.8-64b.500.17 03/26/2021 10:28 (sjfhw780) $ 20.1.2 Linux 64 bit - (Tue Mar 9 20:41:29 PST 2021) Opening LVS data for NOR3_LVS_run_3 in /home/cbohe083/Shared/ELG4137/ELG4137_Lib/NOR3/NOR3_LVS Open time is 0.0 sec. Build pins/attributes took 0.1 sec. Processing poly_conn_pintext 0 shapes 0.0 sec. Processing metal2_conn_pintext 1 shapes 0.0 sec. Processing metal1_conn_pintext 5 shapes 0.0 sec. create satfile took 0.01 user, 0.04 sys, 0.00 elapsed, 128224.0 kbytes write edge poly_conn_pintext took 0.00 user, 0.01 sys, 0.00 elapsed, 128268.0 kbytes write edge metal2_conn_pintext took 0.00 user, 0.00 sys, 0.00 elapsed, 128288.0 kbytes write edge metal1_conn_pintext took 0.00 user, 0.00 sys, 0.00 elapsed, 128304.0 kbytes Building net map file. 0.0 sec. create netmap file took 0.01 user, 0.00 sys, 0.00 elapsed, 128304.0 kbytes create net file took 0.00 user, 0.00 sys, 0.00 elapsed, 128340.0 kbytes WARNING (LBCLV-5663): No bipolar models provided. Can't create bipolar files WARNING (LBCLV-5660): No resistor models provided. Can't create resistor files WARNING (LBCLV-5654): No capacitor models provided. Can't create capacitor file WARNING (LBCLV-5657): No diode models provided. Can't create diode files WARNING (LBCLV-5706): no generic models in rule file Device creation took 0.0 sec Processing cont_ndiff 24 shapes 0.0 sec. write edge cont_ndiff took 0.00 user, 0.00 sys, 0.00 elapsed, 128776.0 kbytes Processing Via1 2 shapes 0.0 sec. write edge Via1 took 0.00 user, 0.00 sys, 0.00 elapsed, 128976.0 kbytes Processing cont_pdiff 38 shapes 0.0 sec. write edge cont_pdiff took 0.00 user, 0.01 sys, 0.00 elapsed, 129116.0 kbytes Processing cont_poly 3 shapes 0.0 sec. write edge cont_poly took 0.00 user, 0.00 sys, 0.00 elapsed, 129272.0 kbytes write edge _pmos1v_MOS_10 took 0.00 user, 0.00 sys, 0.00 elapsed, 129412.0 kbytes write edge _nmos1v_MOS_2 took 0.00 user, 0.00 sys, 0.00 elapsed, 129560.0 kbytes Processing _pmos1v_MOS_10 3 shapes 0.0 sec. Processing _nmos1v_MOS_2 3 shapes 0.0 sec. Processing pwell 1 shapes 0.0 sec. write edge pwell took 0.00 user, 0.00 sys, 0.00 elapsed, 129704.0 kbytes Processing ptap 1 shapes 0.0 sec. write edge ptap took 0.00 user, 0.00 sys, 0.00 elapsed, 129844.0 kbytes Processing ntap 3 shapes 0.0 sec. write edge ntap took 0.00 user, 0.00 sys, 0.00 elapsed, 129984.0 kbytes Processing ndiff_conn 9 shapes 0.0 sec. write edge ndiff_conn took 0.00 user, 0.00 sys, 0.00 elapsed, 130124.0 kbytes Processing poly_conn 3 shapes 0.0 sec. write edge poly_conn took 0.00 user, 0.01 sys, 0.00 elapsed, 130264.0 kbytes Processing pdiff_conn 7 shapes 0.0 sec. write edge pdiff_conn took 0.00 user, 0.00 sys, 0.00 elapsed, 130488.0 kbytes Processing nwell_conn 3 shapes 0.0 sec. write edge nwell_conn took 0.00 user, 0.00 sys, 0.00 elapsed, 130628.0 kbytes Processing metal2_conn 1 shapes 0.0 sec. write edge metal2_conn took 0.00 user, 0.00 sys, 0.00 elapsed, 130768.0 kbytes Processing metal1_conn 9 shapes 0.0 sec. write edge metal1_conn took 0.00 user, 0.00 sys, 0.00 elapsed, 130924.0 kbytes sort edges took 0.03 user, 0.22 sys, 0.00 elapsed, 2100.0 kbytes sort edges and labels took 0.23 user, 0.52 sys, 2.00 elapsed, 131084.0 kbytes vdbToRcx System Usage: Elapsed: 2 seconds. CPU: 0.1 seconds Memory 32 Meg GOALIE2DIR=/CMC/tools/cadence/QUANTUS20.12.000_lnx86/tools.lnx86/extraction/bin/64bit/ export GOALIE2DIR #==========================================================# # Calculate erosion tables for specified process layers #==========================================================# densitymap -V -TC -O metal2_conn.den metal2_conn_tile_spec metal2_conn floatfilename = metal2_conn.flt densitymap took 0.00 user, 0.01 sys, 0.00 elapsed, 2360.0 kbytes densitymap -V -TC -O metal1_conn.den metal1_conn_tile_spec metal1_conn floatfilename = metal1_conn.flt densitymap took 0.00 user, 0.01 sys, 0.00 elapsed, 2360.0 kbytes geom _nmos1v_MOS_2 ndiff_conn - _nmos1v_MOS_2,10,i,1 geom _pmos1v_MOS_10 pdiff_conn - _pmos1v_MOS_10,10,i,1 #==========================================================# # Generate power list #==========================================================# cat global.net > power_list #==========================================================# # Ensure vias do not extend beyond routing #==========================================================# geom -V Via1 metal2_conn metal1_conn - Via1,111,i,2 geom took 0.00 user, 0.01 sys, 0.00 elapsed, 3336.0 kbytes geom -V cont_poly metal1_conn poly_conn - cont_poly,111,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes geom -V cont_pdiff metal1_conn pdiff_conn - cont_pdiff_metal1_conn_pdiff_conn,111,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes geom -V cont_ndiff metal1_conn ndiff_conn - cont_ndiff_metal1_conn_ndiff_conn,111,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes geom -V ptap pdiff_conn - ptap_pdiff_conn_ovia,11,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3332.0 kbytes geom -V pwell ptap - pwell_ptap_ovia,11,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes geom -V ntap ndiff_conn - ntap_ndiff_conn_ovia,11,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes geom -V nwell_conn ntap - nwell_conn_ntap_ovia,11,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3336.0 kbytes #==========================================================# # Flatten net file, routing, via and device layers #==========================================================# SAVEDIR=`beginFlattenInputs` beginFlattenInputs export SAVEDIR /bin/mv -f NET h_NET flatnet -V -li -h '/' h_NET NET flatnet took 0.00 user, 0.02 sys, 0.00 elapsed, 12092.0 kbytes netprint -V -N1 power_list:power_list_nums NET flattenTransistorData _nmos1v_MOS_2 meters flattub took 0.00 user, 0.01 sys, 0.00 elapsed, 4848.0 kbytes flatnet took 0.00 user, 0.02 sys, 0.00 elapsed, 12080.0 kbytes flattenTransistorData _pmos1v_MOS_10 meters flattub took 0.00 user, 0.00 sys, 0.00 elapsed, 4868.0 kbytes flatnet took 0.00 user, 0.01 sys, 0.00 elapsed, 13552.0 kbytes flattenLayers -m metal2_conn metal1_conn poly_conn ndiff_conn pdiff_conn \ nwell_conn Via1 cont_poly cont_pdiff_metal1_conn_pdiff_conn \ cont_ndiff_metal1_conn_ndiff_conn ptap_pdiff_conn_ovia ptap \ pwell_ptap_ovia pwell ntap_ndiff_conn_ovia ntap nwell_conn_ntap_ovia \ cont_pdiff cont_ndiff flattub took 0.00 user, 0.02 sys, 0.00 elapsed, 3456.0 kbytes endFlattenInputs #==========================================================# # Initialize CAP_GROUND variable #==========================================================# CAP_GROUND=`findCapGround -g Vss NET` findCapGround -g Vss NET echo "CAP_GROUND=" ${CAP_GROUND} CAP_GROUND= 2 export CAP_GROUND reconnect -cgnd ${CAP_GROUND} -float floatlvsnetsfile -tf \ _nmos1v_MOS_2,_pmos1v_MOS_10 -probe \ metal2_conn_pintext:metal2_conn:metal2_conn_pintext_fvia,metal1_conn_pintext:metal1_conn:metal1_conn_pintext_fvia,poly_conn_pintext:poly_conn:poly_conn_pintext_fvia geom _nmos1v_MOS_2,_pmos1v_MOS_10 - qrcgate,1,i,1 iprint -imerge power_list_nums floatlvsnetsfile power_list_nums2 mv power_list_nums power_list_nums_orig cp power_list_nums2 power_list_nums #==========================================================# # Segregate interconnect into resistive and non-resistive #==========================================================# selectNetsByNumber power_list_nums metal1_conn p_rmetal1_conn np_rmetal1_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes selectNetsByNumber power_list_nums metal2_conn p_rmetal2_conn np_rmetal2_conn epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2088.0 kbytes selectNetsByNumber power_list_nums ndiff_conn p_rndiff_conn np_rndiff_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes selectNetsByNumber power_list_nums ntap p_rntap np_rntap epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2088.0 kbytes selectNetsByNumber power_list_nums nwell_conn p_rnwell_conn np_rnwell_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes selectNetsByNumber power_list_nums pdiff_conn p_rpdiff_conn np_rpdiff_conn epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2092.0 kbytes selectNetsByNumber power_list_nums poly_conn p_rpoly_conn np_rpoly_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes selectNetsByNumber power_list_nums ptap p_rptap np_rptap epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2088.0 kbytes selectNetsByNumber power_list_nums pwell p_rpwell np_rpwell epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2096.0 kbytes selectNetsByNumber power_list_nums Via1 p_rVia1 np_rVia1 epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2088.0 kbytes selectNetsByNumber power_list_nums cont_poly p_rcont_poly np_rcont_poly epick took 0.00 user, 0.02 sys, 1.00 elapsed, 2092.0 kbytes mv power_list_nums_orig power_list_nums #==========================================================# # Create resistor cut regions between resistive # interconnect levels #==========================================================# mergevia -V -tech /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical \ -cnt np_rVia1 rVia1 - np_rmetal2_conn np_rmetal1_conn mergevia took 0.00 user, 0.01 sys, 0.00 elapsed, 9364.0 kbytes mergevia -V -tech /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical \ -cnt np_rcont_poly rcont_poly - np_rmetal1_conn np_rpoly_conn mergevia took 0.00 user, 0.02 sys, 0.00 elapsed, 9368.0 kbytes #==========================================================# # Create resistive interconnect MOSFET terminals #==========================================================# createNRMosfetGateTerminal _nmos1v_MOS_2 np_rpoly_conn _nmos1v_MOS_2_mgvia createNRMosfetGateTerminal _pmos1v_MOS_10 np_rpoly_conn _pmos1v_MOS_10_mgvia #==========================================================# # Assign net numbers to cut regions #==========================================================# connect -V -relocate NET np_rndiff_conn:np_rndiff_conn.conn \ np_rpdiff_conn:np_rpdiff_conn.conn np_rntap:np_rntap.conn \ np_rnwell_conn:np_rnwell_conn.conn np_rptap:np_rptap.conn \ np_rpwell:np_rpwell.conn rVia1 rcont_poly _nmos1v_MOS_2_mgvia \ _pmos1v_MOS_10_mgvia - ntap_ndiff_conn_ovia,3,1 \ nwell_conn_ntap_ovia,4,3 ptap_pdiff_conn_ovia,5,2 pwell_ptap_ovia,6,5 \ - connect took 0.00 user, 0.01 sys, 0.00 elapsed, 270552.0 kbytes #==========================================================# # Assign net numbers to resistor vias #==========================================================# geom -V cont_ndiff_metal1_conn_ndiff_conn np_rndiff_conn.conn - tmp_rcont_ndiff_metal1_conn_ndiff_conn,11,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3068.0 kbytes mergevia -V -i -tech /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical \ -cnt tmp_rcont_ndiff_metal1_conn_ndiff_conn \ rcont_ndiff_metal1_conn_ndiff_conn - np_rmetal1_conn np_rndiff_conn mergevia took 0.19 user, 0.29 sys, 2.00 elapsed, 9364.0 kbytes /bin/rm -f tmp_rcont_ndiff_metal1_conn_ndiff_conn geom -V cont_pdiff_metal1_conn_pdiff_conn np_rpdiff_conn.conn - tmp_rcont_pdiff_metal1_conn_pdiff_conn,11,i,2 geom took 0.00 user, 0.01 sys, 0.00 elapsed, 3072.0 kbytes mergevia -V -i -tech /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical \ -cnt tmp_rcont_pdiff_metal1_conn_pdiff_conn \ rcont_pdiff_metal1_conn_pdiff_conn - np_rmetal1_conn np_rpdiff_conn mergevia took 0.16 user, 0.29 sys, 0.00 elapsed, 9368.0 kbytes /bin/rm -f tmp_rcont_pdiff_metal1_conn_pdiff_conn #==========================================================# # Assign net numbers to nonresistive layers #==========================================================# epick -V -reo -e rcont_ndiff_metal1_conn_ndiff_conn -e \ rcont_pdiff_metal1_conn_pdiff_conn np_rndiff_conn.conn tmp_ndiff_conn epick took 0.00 user, 0.01 sys, 0.00 elapsed, 2092.0 kbytes epick -V -reo -e tmp_ndiff_conn -c np_rndiff_conn.conn tmp1_ndiff_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes geom -V tmp1_ndiff_conn np_rndiff_conn - tmp1_ndiff_conn,11,i,2 geom took 0.00 user, 0.01 sys, 0.00 elapsed, 3068.0 kbytes geom -V tmp_ndiff_conn,tmp1_ndiff_conn - np_rndiff_conn,1,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3068.0 kbytes /bin/rm -f tmp_ndiff_conn tmp1_ndiff_conn epick -V -reo -e rcont_ndiff_metal1_conn_ndiff_conn -e \ rcont_pdiff_metal1_conn_pdiff_conn np_rpdiff_conn.conn tmp_pdiff_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes epick -V -reo -e tmp_pdiff_conn -c np_rpdiff_conn.conn tmp1_pdiff_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes geom -V tmp1_pdiff_conn np_rpdiff_conn - tmp1_pdiff_conn,11,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3064.0 kbytes geom -V tmp_pdiff_conn,tmp1_pdiff_conn - np_rpdiff_conn,1,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3072.0 kbytes /bin/rm -f tmp_pdiff_conn tmp1_pdiff_conn epick -V -reo -e rcont_ndiff_metal1_conn_ndiff_conn -e \ rcont_pdiff_metal1_conn_pdiff_conn np_rnwell_conn.conn tmp_nwell_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes epick -V -reo -e tmp_nwell_conn -c np_rnwell_conn.conn tmp1_nwell_conn epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2092.0 kbytes geom -V tmp1_nwell_conn np_rnwell_conn - tmp1_nwell_conn,11,i,2 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3068.0 kbytes geom -V tmp_nwell_conn,tmp1_nwell_conn - np_rnwell_conn,1,i,1 geom took 0.00 user, 0.00 sys, 0.00 elapsed, 3068.0 kbytes /bin/rm -f tmp_nwell_conn tmp1_nwell_conn epick -V -reo -e rcont_ndiff_metal1_conn_ndiff_conn -e \ rcont_pdiff_metal1_conn_pdiff_conn np_rpwell.conn tmp_pwell epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2088.0 kbytes epick -V -reo -e tmp_pwell -c np_rpwell.conn tmp1_pwell epick took 0.00 user, 0.00 sys, 0.00 elapsed, 2088.0 kbytes geom -V tmp1_pwell np_rpwell - tmp1_pwell,11,i,2 geom took 0.00 user, 0.01 sys, 0.00 elapsed, 3068.0 kbytes geom -V tmp_pwell,tmp1_pwell - np_rpwell,1,i,1 geom took 0.00 user, 0.01 sys, 0.00 elapsed, 3072.0 kbytes /bin/rm -f tmp_pwell tmp1_pwell #==========================================================# # Process text layers #==========================================================# flatlabel -V -tc -F -l flatlabel.info metal2_conn_pintext,metal1_conn_pintext,poly_conn_pintext L1T0,L2T0,L3T0 INFO (FLTLBL-89003): exec labsort -V L1T0 INFO (FLTLBL-89003): exec labsort -V L2T0 INFO (FLTLBL-89003): exec labsort -V L3T0 # 1 np_rpoly_conn # 2 np_rmetal1_conn # 3 np_rmetal2_conn #==========================================================# # Parasitic R extraction with default precision #==========================================================# rex -V -m -pd -I'#' -l slab -tech \ /home/cbohe083/Shared/ELG4137/gpdk045_v_5_0/qrc/typical -map \ p2elayermapfile -wee p2elayermapfile -N NET -Ply np_rpoly_conn -er \ np_rmetal2_conn,metal2_conn.den:np_rmetal1_conn,metal1_conn.den -rP \ res.mod np_rpoly_conn::poly_conn_cut::-0.003 \ np_rmetal1_conn::metal1_conn_cut::s,w:0.06,0.06,0:0.06,0.08,0:0.06,0.09,0:0.06,0.13,0:0.06,0.16,0:0.06,0.19,0:0.06,0.26,0:0.06,0.38,0:0.06,0.5,0:0.06,0.63,0:0.06,0.83,0:0.06,1,0.01:0.06,1.5,0.01:0.06,3,0.01:0.06,4.05,0.01:0.08,0.06,0.01:0.08,0.08,0.01:0.08,0.09,0.01:0.08,0.13,0:0.08,0.16,0.01:0.08,0.19,0:0.08,0.26,0:0.08,0.38,0:0.08,0.5,0:0.08,0.63,0:0.08,0.83,0:0.08,1,0.01:0.08,1.5,0.01:0.08,3,0.01:0.08,4.05,0.01:0.09,0.06,0.01:0.09,0.08,0.01:0.09,0.09,0.01:0.09,0.13,0:0.09,0.16,0.01:0.09,0.19,0:0.09,0.26,0:0.09,0.38,0:0.09,0.5,0:0.09,0.63,0:0.09,0.83,0:0.09,1,0.01:0.09,1.5,0.01:0.09,3,0.01:0.09,4.05,0.01:0.13,0.06,0.01:0.13,0.08,0.01:0.13,0.09,0.01:0.13,0.13,0:0.13,0.16,0.01:0.13,0.19,0:0.13,0.26,0:0.13,0.38,0:0.13,0.5,0:0.13,0.63,0:0.13,0.83,0:0.13,1,0.01:0.13,1.5,0.01:0.13,3,0.01:0.13,4.05,0.01:0.16,0.06,0.01:0.16,0.08,0.01:0.16,0.09,0.01:0.16,0.13,0:0.16,0.16,0.01:0.16,0.19,0:0.16,0.26,0:0.16,0.38,0:0.16,0.5,0:0.16,0.63,0:0.16,0.83,0:0.16,1,0.01:0.16,1.5,0.01:0.16,3,0.01:0.16,4.05,0.01:0.19,0.06,0.02:0.19,0.08,0.01:0.19,0.09,0.01:0.19,0.13,0:0.19,0.16,0.01:0.19,0.19,0:0.19,0.26,0:0.19,0.38,0:0.19,0.5,0:0.19,0.63,0:0.19,0.83,0:0.19,1,0.01:0.19,1.5,0.01:0.19,3,0.01:0.19,4.05,0.01:0.26,0.06,0.02:0.26,0.08,0.01:0.26,0.09,0.01:0.26,0.13,0:0.26,0.16,0.01:0.26,0.19,0:0.26,0.26,0:0.26,0.38,0:0.26,0.5,0:0.26,0.63,0:0.26,0.83,0:0.26,1,0.01:0.26,1.5,0.01:0.26,3,0.01:0.26,4.05,0.01:0.38,0.06,0.02:0.38,0.08,0.01:0.38,0.09,0.01:0.38,0.13,0:0.38,0.16,0.01:0.38,0.19,0:0.38,0.26,0:0.38,0.38,0:0.38,0.5,0:0.38,0.63,0:0.38,0.83,0:0.38,1,0.01:0.38,1.5,0.01:0.38,3,0.01:0.38,4.05,0.01:0.63,0.06,0.02:0.63,0.08,0.01:0.63,0.09,0.01:0.63,0.13,0:0.63,0.16,0.01:0.63,0.19,0:0.63,0.26,0:0.63,0.38,0:0.63,0.5,0:0.63,0.63,0:0.63,0.83,0:0.63,1,0.01:0.63,1.5,0.01:0.63,3,0.01:0.63,4.05,0.01:0.83,0.06,0.02:0.83,0.08,0.01:0.83,0.09,0.01:0.83,0.13,0:0.83,0.16,0.01:0.83,0.19,0:0.83,0.26,0:0.83,0.38,0:0.83,0.5,0:0.83,0.63,0:0.83,0.83,0:0.83,1,0.01:0.83,1.5,0.01:0.83,3,0.01:0.83,4.05,0.01:1.5,0.06,0.02:1.5,0.08,0.01:1.5,0.09,0.01:1.5,0.13,0:1.5,0.16,0.01:1.5,0.19,0:1.5,0.26,0:1.5,0.38,0:1.5,0.5,0:1.5,0.63,0:1.5,0.83,0:1.5,1,0.01:1.5,1.5,0.01:1.5,3,0.01:1.5,4.05,0.01:3,0.06,0.02:3,0.08,0.01:3,0.09,0.01:3,0.13,0:3,0.16,0.01:3,0.19,0:3,0.26,0:3,0.38,0:3,0.5,0:3,0.63,0:3,0.83,0:3,1,0.01:3,1.5,0.01:3,3,0.01:3,4.05,0.01:5,0.06,0.02:5,0.08,0.01:5,0.09,0.01:5,0.13,0:5,0.16,0.01:5,0.19,0:5,0.26,0:5,0.38,0:5,0.5,0:5,0.63,0:5,0.83,0:5,1,0.01:5,1.5,0.01:5,3,0.01:5,4.05,0.01 \ np_rmetal2_conn::metal2_conn_cut::s,w:0.06,0.06,0:0.06,0.08,0:0.06,0.09,0:0.06,0.13,0:0.06,0.16,0:0.06,0.19,0:0.06,0.26,0:0.06,0.38,0:0.06,0.5,0:0.06,0.63,0:0.06,0.83,0:0.06,1,0:0.06,1.5,0:0.06,3,0:0.06,4.05,0:0.08,0.06,0:0.08,0.08,0:0.08,0.09,0:0.08,0.13,0:0.08,0.16,0:0.08,0.19,0:0.08,0.26,0:0.08,0.38,0:0.08,0.5,0:0.08,0.63,0:0.08,0.83,0:0.08,1,0:0.08,1.5,0:0.08,3,0:0.08,4.05,0:0.09,0.06,0:0.09,0.08,0:0.09,0.09,0:0.09,0.13,0:0.09,0.16,0:0.09,0.19,0:0.09,0.26,0:0.09,0.38,0:0.09,0.5,0:0.09,0.63,0:0.09,0.83,0:0.09,1,0:0.09,1.5,0:0.09,3,0:0.09,4.05,0:0.13,0.06,0.01:0.13,0.08,0.01:0.13,0.09,0.01:0.13,0.13,0:0.13,0.16,0:0.13,0.19,0:0.13,0.26,0:0.13,0.38,0:0.13,0.5,0:0.13,0.63,0:0.13,0.83,0:0.13,1,0:0.13,1.5,0:0.13,3,0:0.13,4.05,0:0.16,0.06,0.01:0.16,0.08,0.01:0.16,0.09,0.01:0.16,0.13,0:0.16,0.16,0:0.16,0.19,0:0.16,0.26,0:0.16,0.38,0:0.16,0.5,0:0.16,0.63,0:0.16,0.83,0:0.16,1,0:0.16,1.5,0:0.16,3,0:0.16,4.05,0:0.19,0.06,0.01:0.19,0.08,0.01:0.19,0.09,0.01:0.19,0.13,0:0.19,0.16,0:0.19,0.19,0:0.19,0.26,0:0.19,0.38,0:0.19,0.5,0:0.19,0.63,0:0.19,0.83,0:0.19,1,0:0.19,1.5,0:0.19,3,0:0.19,4.05,0:0.26,0.06,0.01:0.26,0.08,0.01:0.26,0.09,0.01:0.26,0.13,0:0.26,0.16,0:0.26,0.19,0:0.26,0.26,0:0.26,0.38,0:0.26,0.5,0:0.26,0.63,0:0.26,0.83,0:0.26,1,0:0.26,1.5,0:0.26,3,0:0.26,4.05,0:0.38,0.06,0.01:0.38,0.08,0.01:0.38,0.09,0.01:0.38,0.13,0:0.38,0.16,0:0.38,0.19,0:0.38,0.26,0:0.38,0.38,0:0.38,0.5,0:0.38,0.63,0:0.38,0.83,0:0.38,1,0:0.38,1.5,0:0.38,3,0:0.38,4.05,0:0.63,0.06,0.01:0.63,0.08,0.01:0.63,0.09,0.01:0.63,0.13,0:0.63,0.16,0:0.63,0.19,0:0.63,0.26,0:0.63,0.38,0:0.63,0.5,0:0.63,0.63,0:0.63,0.83,0:0.63,1,0:0.63,1.5,0:0.63,3,0:0.63,4.05,0:0.83,0.06,0.01:0.83,0.08,0.01:0.83,0.09,0.01:0.83,0.13,0:0.83,0.16,0:0.83,0.19,0:0.83,0.26,0:0.83,0.38,0:0.83,0.5,0:0.83,0.63,0:0.83,0.83,0:0.83,1,0:0.83,1.5,0:0.83,3,0:0.83,4.05,0:1.5,0.06,0.01:1.5,0.08,0.01:1.5,0.09,0.01:1.5,0.13,0:1.5,0.16,0:1.5,0.19,0:1.5,0.26,0:1.5,0.38,0:1.5,0.5,0:1.5,0.63,0:1.5,0.83,0:1.5,1,0:1.5,1.5,0:1.5,3,0:1.5,4.05,0:3,0.06,0.01:3,0.08,0.01:3,0.09,0.01:3,0.13,0:3,0.16,0:3,0.19,0:3,0.26,0:3,0.38,0:3,0.5,0:3,0.63,0:3,0.83,0:3,1,0:3,1.5,0:3,3,0:3,4.05,0:5,0.06,0.01:5,0.08,0.01:5,0.09,0.01:5,0.13,0:5,0.16,0:5,0.19,0:5,0.26,0:5,0.38,0:5,0.5,0:5,0.63,0:5,0.83,0:5,1,0:5,1.5,0:5,3,0:5,4.05,0 \ - rVia1,2,3,t rcont_ndiff_metal1_conn_ndiff_conn,2,t \ rcont_pdiff_metal1_conn_pdiff_conn,2,t rcont_poly,1,2,t \ _nmos1v_MOS_2_mgvia,1,z _pmos1v_MOS_10_mgvia,1,z - L1T0,3,I L2T0,2,I \ L3T0,1,I ERROR (LBMISC-215052): cannot create np_rpoly_conn: No such file or directory ERROR (REX-163152): /CMC/tools/cadence/QUANTUS20.12.000_lnx86/tools.lnx86/extraction/bin/64bit//geom failed with status 255 ERROR (LBRCXM-609): Bad return status from RCX run. 0xff00 ERROR (LBRCXM-709): ***** Quantus terminated abnormally *****