// Generated for: spectre
// Generated on: Nov 12 15:15:09 2020
// Design library name: BRAZOS_ygoel
// Design cell name: back_annotate
// Design view name: config
simulator lang=spectre
global 0 GND_SUB!
parameters globalSigma=5 SubMod=0
include "/tools/cds2/released_models/RELEASE/internal/U130S4/F01/E5/Vsoi-1.15/modellib.scs" section=Typ
include "/tools/pdk/F01/U130S4/7.2/tools/5LM_BUMP/emxinterface/scalablemodels/emx_inductors.scs"
include "/tools/pdk/F01/U130S4/7.2/tools/cds06.18.110/tools/dfII/etc/cdslib/artist/functional/allFunc.scs"

// Library name: U130S1
// Cell name: gnd_sub
// View name: schematic
// Inherited view list: av_extracted schematic spectre
subckt gnd_sub _GND_SUB
    V0 (GND_SUB! _GND_SUB) vsource dc=0 type=dc
ends gnd_sub
// End of subcircuit definition.

// Library name: analogLib
// Cell name: presistor
// View name: schematic
// Inherited view list: av_extracted schematic spectre
subckt presistor PLUS MINUS
parameters c=0 r=1K a_tc1=0 a_tc2=0
    C1 (PLUS 0) capacitor c=c/2
    C2 (MINUS 0) capacitor c=c/2
    R0 (PLUS MINUS) resistor r=r tc1=a_tc1 tc2=a_tc2
ends presistor
// End of subcircuit definition.

// Inherited view list: av_extracted schematic spectre
// Library name: BRAZOS_ygoel
// Cell name: my_cell
// View name: av_extracted_RC
// View type: maskLayout
subckt my_cell in out
    R2 (\1\:in \2\:net5) pply w=8e-07 l=4.3e-07 ms=1 m=1
    R1 (\3\:net5 \2\:net6) pply w=8e-07 l=4.3e-07 ms=1 m=1
    R0 (\3\:net6 \2\:out) pply w=8e-07 l=4.3e-07 ms=1 m=1
    C1 (\2\:in net5) capacitor c=1.27322e-16
    C2 (\4\:net5 net6) capacitor c=1.22846e-16
    C3 (\4\:net6 \1\:out) capacitor c=1.30186e-16
    C4 (in GND_SUB!) capacitor c=6.93105e-17
    C5 (out GND_SUB!) capacitor c=7.38673e-17
    C6 (\2\:in GND_SUB!) capacitor c=9.23374e-17
    C7 (net5 GND_SUB!) capacitor c=1.38343e-16
    C8 (\4\:net5 GND_SUB!) capacitor c=1.3972e-16
    C9 (net6 GND_SUB!) capacitor c=3.21566e-16
    C10 (\4\:net6 GND_SUB!) capacitor c=3.20097e-16
    C11 (\1\:out GND_SUB!) capacitor c=9.68324e-17
    Rg1 (\2\:in in) presistor c=0 r=0.5381
    Rg2 (\4\:net5 net5) presistor c=0 r=1.9957
    Rg3 (\4\:net6 net6) presistor c=0 r=5.748
    Rg4 (out \1\:out) presistor c=0 r=0.5965
    Rh_1_1 (\1\:in \2\:in) presistor c=0 r=0.0275
    Rh_1_2 (net5 \2\:net5) presistor c=0 r=0.0275
    Rh_1_3 (\3\:net5 \4\:net5) presistor c=0 r=0.0275
    Rh_1_4 (net6 \2\:net6) presistor c=0 r=0.0275
    Rh_1_5 (\3\:net6 \4\:net6) presistor c=0 r=0.0275
    Rh_1_6 (\1\:out \2\:out) presistor c=0 r=0.0275
ends my_cell
// End of subcircuit definition.

// Library name: BRAZOS_ygoel
// Cell name: back_annotate
// View name: schematic
// Inherited view list: av_extracted schematic spectre
V0 (net29 0) vsource dc=1.2 type=dc
I3 (0) gnd_sub
I11 (net29 0) my_cell
simulatorOptions options psfversion="1.1.0" reltol=1e-3 vabstol=1e-6 \
    iabstol=1e-12 temp=27 tnom=27 homotopy=all scalem=1.0 scale=1.0 \
    gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 digits=5 cols=80 pivrel=1e-3 \
    sensfile="../psf/sens.output" dochecklimit=yes checklimitdest=both \
    bsimsoi_va=yes 
dcOpCheckLimit checklimit checkallasserts=yes severity=none
dcOp dc write="spectre.dc" save=all maxiters=150 maxsteps=10000 \
    annotate=status
dcOpInfo info what=oppoint where=rawfile
modelParameter info what=models where=rawfile
element info what=inst where=rawfile
outputParameter info what=output where=rawfile
designParamVals info what=parameters where=rawfile
primitives info what=primitives where=rawfile
subckts info what=subckts where=rawfile
asserts info what=assert where=rawfile
save net29 I11:1 I11:2 I11.net6 I11.R0:2 I11.R1:1 I11.net5 I11.R1:2 \
    I11.R2:1 I11.R2:2 
saveOptions options save=all currents=all