Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I have just downloaded a set of standard libraries in TSMC's 65nm process node
I would like to make them appear in Cadence IC 6.1.3 library manager
Do I have to use Vulcan to install them or just simply have to uzip them
If I need Vulcan could you please point me out to any related literature describing the installation process
It depends what's in whatever you've downloaded. If it's stream (GDS) you may just need to stream them in. If they're Cadence libraries already, you may just need to add a reference in your cds.lib. Or if in IC5141 format, you might need to use cdb2oa to convert them.
Best is to unpack the library and then see what's there.
Vulcan is a tool available as IP from Cadence VCAD Services. I'm not sure that you need it necessarily - it really depends on what you're aiming to do, and what is in the data that you've downloaded (which I can't see, of course).
In reply to Andrew Beckett:
I did unpack the libraries. The front-end kit consists of libraries in ccs format (composite current source) and the back-end kit consists of libraries in cdb format
Could you please advice me on how to install the above libraries and what set of tools (cdb20a convertion scripts, Vulcan etc) I might need
In reply to AnalogGR:
Not sure about the "ccs" format (I assume this is something to do with "liberty" (aka ".lib") format for Synopsys tools?). I don't think you would want to import these into Virtuoso.
For the back end libraries, I suggest you start by using Tools->Conversion Toolbox and then using the CDB to OA conversion from there, as it's GUI based.
Again, you didn't give much detail, so can't give more specific advice. Can you ask TSMC?
Thanks for your reply above
Regarding the front-end library the existed libraries appears to have a .db and a .lib extension. Is this a Cadence compatible format or needs some short of convertion?
Best Regards and Merry Christmas
I don't know. These are likely to be used by tools such as ETS (Encounter Timing System) and RC (RTL Compiler) - I believe they can read "liberty" format files, but this is not my area of expertise. It's probably a better question for the Digital Implementation Forum.
In reply to Mawan:
In the root of the installed PDK you'll find a file, cds.lib, which defines the libraries included in the PDK.
In your workarea, all you need to do is to add:
and then any libraries included in the PDK will be available in the virtuoso session started from that directory.
I want the TSMC 65nm process node. It should include .lef , .lib and .v files. If you have then please send the files on my email id: email@example.com
Thanks and regards,
In reply to PSASWALE:
Nobody on this forum will be allowed to send these to you. They are TSMC's intellectual property and anyone with these files will be bound by TSMC's license/NDA on use of these files, which will preclude sharing them.
The same is true of me (and so I won't also respond to the direct email you sent me as I've covered it here).
You will need to contact TSMC or one of their distributors (essentially whoever you're gaining access to the TSMC technology from) to obtain these.