Cadence® system design and verification solutions, integrated under our Verification Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
More Support Log In
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technology. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I am using Allegro PCB Editor 16.3. Although I have used this product for a while I've never needed to add Maximum Package Height as something to flag using DRC. I've looked in the documentation and the only constraint-setting information I can find is for spacing/width/pairing type stuff. Where can I find the documentation to set up maximum height constraints? I know I can manually check each package on the board for it's Max Height property that is far from ideal.
I will be grateful for any insight that can be given.
In reply to oldmouldy:
Thank you. All of the parts I have created have the package boundry defined and the Max Height property attached. What I don't know how to do is to set up the .brd file to have areas where I specify the maximum allowable height of a component for that area. For instance, I have an area where the component height can't be more than 200 mils. I have components in my design that are up to 620 mils in height. I'm looking for how to have accidentally placed components that exceed 200 mils in the restricted area trigger a DRC error. Is that possible? It would seem so if we are putting Max Height properties into the footprints.+
In reply to BuddSw:
In reply to Rik Lee:
I have done this, but I am always getting DRC errors for PACKAGE_HEIGHT_MIN even though I have not set a property in the keepout region for this.
In reply to mvonahnen:
OK, for a keepout, Package_Height_Min is going to be 0 if you don't specify a value, that's going to be the board surface, so any parts placed within the boundary of that shape will cause a DRC. You increase the Package_Height_Min property of a Package Keepout to raise it off the board surface to allow parts with a height of less than, or equal to, the Package_Height_Min to be placed there without a DRC, parts with Package_Height_Max of greater than the Package_Height_Min of the Keepout will generate a DRC.
Hello..I am new user of PCB EDITOR. I have dificulte to create a circular package boundary (example: electrolthic capacitor).
Can you help me? There is any video or information about this!?
In reply to pmedronho:
Shape - Circular, set the class/subclass to Package Geometry/Place_Bound_Top (in the fold out Options menu on the right hand side of the screen) and then draw the circle you want. If your using 16.6 look at the Options menu and you can set the size you require and then Place Circle option and it will be attached to your mouse ready to place.
Dear BuddSW ,
This may not be the correct procedure but its simple way I follow when I have a height restriction in some area during placement . Draw package keepout in the area where you have a height restriction & assign the height limit for that shape( say 100mils) , when you view this in 3D veiw you will notice if any part placed which height is more than 100mil will protrude out as shown in image, but the issue here is you get CC error for all part placed inside that keepout