Cadence® system design and verification solutions, integrated under our Verification Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
More Support Log In
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technology. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I'm running an old Orcad Capture/PCB 16.2 - and have obviously been away from it too long!
I can netlist (with the usual renaming warnings) and open the netlist in Orcad PCB. I get a (correct) list of parts when I go to Place/Manually - but there's no Quickview preview and I can't place anything. There should be an error message to hint what's wrong - but I don't know where to look (netrev.lst is "clean" with no error/oversight/warning detected). Very, very frustrating!
I'm sure this is a total beginners mistake - can anyone help me out a bit? It would be greatly appreciate! :-)
The parts, along with padstacks, that you can place are controlled by your psmpath and padpath variables. Look in your User Preferences >Paths >Library >psmpath and padpath to ensure that the paths point to the physical parts. If they do can you place parts using the Placement form placement list tab set to 'Package symbols' and the Advanced Settings tab has 'Library' enabled?
In reply to Rik Lee:
Thanks for the reply!
I've spent quite some time playing around with the pasmpath and padpath. (The interface for changing those does not seem totally stable?) Tried both forward and back slashes (desperation will drive me to such ;-). In any case I can see both Orcads default libs and my own footprints listed in text when I change to 'Package symbols' (if I check "library" instead of "database" in the advanced settings tab - but still no preview, and I can't place anything.
However there's definitely something cheesy with the paths. I had a space and some dashes in my library path. Just now I came think it might be a problem... Initially I only removed it in the psmpath and padpaths. Now I would expect the symbols would disappear from from the 'Package symbols' list. They didn't. Not even after a restart of Orcad PCB. Anyway, I've removed it from the actual path too. But now I do indeed get errors like "WARNING(SPMHNI-337): Unable to load symbol 'DO41' for device 'DIODE 1N5819 SCHOTTKY 40V-1A__1': WARNING(SPMHUT-127): Could not find padstack CIRTHR-1MM1-2MM8." when trying to netlist... After messing a bit around, I'm back at clean (no spaces/dashes) paths and only back slashes in the paths (inserted by browsing). I get "flawless" netrev.lst when netlisting - but still can't preview or place anything! There's a screen shot of path and placement dialogue at http://www.hi5.dk/OrcadPCB-01.png. psmpath is just one level down.
If I ignore the missing preview - I might suspect I'm missing something in the placement process. But I do not remember it being a problem earlier. And I'm very frustrated about not even getting warnings or errors...
Thanks for your time! Best regards, Anders
In reply to N i z e:
Thanks to NordCad for the solution!
You/I should be seeing check boxes to the left of refdes in the manual placement dialogue box! I didn't. It seems this is a issue with Windows 7. The text of the dialogue boxes is a bitmapped font - and the default Windows 7 fonts scales the text "over" the check boxes in the placement dialogue. Thus, my "selection" was only selecting/highlighting the refdes text (which curiously is supported - I still haven't found out what the purpose might be).
In any case, after applying the hack below I can actually place part in OrcadPCB 16.2 under Windows 7 64-bit (I assume this also applies to Allegro - although it's less likely that people will be running older versions of those): http://blogs.msdn.com/b/developingfordynamicsgp/archive/2009/11/25/windows-7-bitmap-fonts-and-microsoft-dynamics-gp.aspx?CommentPosted=true
Hope this might help others from the frustrations and immense waste of time I experienced! :-)