Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I would like to know how to turn off the application mode hilightling in 16.0. I find it very distracting and irritating to have things highlight when the cursor just moves across them. Anyone else with me on this? I can turn it off temporarily in the menu or with appsmodeoff but it comes back on the next command. This is bugging me enough to go back to 15.7 if there is no way to turn it off. I have looked through the setup env options and did not see anything there.
I am not sure if this answers your question or not but you can set the Application mode to None to disable the new pre-selection behavior. Under the Setup Menu select Application Modes --> NoneHope this helps,Mike CatramboneUTStarcom, Inc.
I have tried that and it works ok until the next command is executed. I have not downloaded any hotfixes yet as this looks like a bug. I am curious if you are seeing the same behavior with turning it off only lasting until the next add connect etc. Please let me know.
No. I am not seeing that behavior. I can set the Application Modes to None and it seems to stick. If I open a new design in the same session it reverts back to General Edit Application mode but as long as I am in the same design the setting sticks.I did download the Hotfix that was available earlier in the month so maybe the issue you are seeing was corrected.Mike
That is good news to me that the hotfix will correct that behavior. Thanks a lot for the information Mike.
Try the following:Setup + User Preference Editor + Z-early_adopterMake "datatips" deactivate it.satya
BTW, That's how you disable data tips in 15.7 In 16.0 you disable data-tips from, Setup => User Preferences => Preselection .Randy
Good tip on the way to turn off the data-tips via User Preferences.I believe that the original question was to turn off the application mode highlighting and just turning off the data tips will not stop the element highlighting when you mouse over it.Mike
*Here is a solution to keep the cursor hover highlight flashing off permanently in rev 16.0.
Add this line to your env file:
set script_startup = start
Make a file called allegro_start.scr in your script path with contents:
echo "Running allegro_start script to turn off application mode hover highlighting . . ."
--Works like a charm.
More info: (Notice it prepends "allegro_" to the script name you have in your scriptpath so be aware of this when naming the script!)
script_startup : Script name used on startup.
We will prepend the program name to the name provided (_), and lookup
the filename using SCRIPTPATH. No warning is issued if
script cannot be found. More flexibility can obtained by
using the "-s <script>" option when starting the program.
Example: "script_startup = foo" results in our looking for
allegro_foo.scr when starting allegro and
pad_designer_foo.scr with pad_designer.
This will disable pre-selection. It you wish to disable pre-selection then it is easier to just add: set no_preselect_allegro to your local env file.If you wish to take advantage of pre-selection mode there is no way of disabling the temporary highlight of selectable elements.
I added the "set no_preselect_allegro" to my local env file and it works when Idle. As soon as I execute a command the elements are highlighting again depending on what is selected in the Find Filter. Is there a way to turn this off?
I see the same thing here with it not staying off. . . .
I have switched back to 15.7 until the hover highlight distracting graphics can be turned off and stay turned off. I was unable to find a way to get it to stay off. It was causing such a slow down I was forced to go back to 15.7 even though I really don't want to.
Now I am having another problem with the graphics being pretty slow repaint from left to right. I have a medium price card in there a GEFORCE 8600 GTS with 256 meg that should rock and roll fast but it does'nt. I have put a request into Cadence and got a reply back but no solution.
Regarding slow graphics, Make sure you have the latest NVIDIA drivers installed for your graphics card. If you do have the latest drivers and graphics are still too slow you can disable OpenGL graphics and graphics performance should return to as it was in 15.7. OpenGL can be disabled from: Setup => User Preferences => OpenGL, disable_opengl .Randy