Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Hello everyone~I just install MMSIM7.1 with IC5141_USR6 and try to simulation a simple circuit, but when I finish all settings go "netlist and run". It stopped at CIW and showed the following message"errors encountered during simulation. the simulator run log has not been generated. Possible cause could be an invalid command line option for the version of the simulator you are running. choose setup ->environment and verify that the command line option specified in the userCmdLineOption field are supported for the simulator. Alternatively run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error."
and then I run the runsimulation and get a message "/usr/cad/cadence/MMSIM/cur/tools.lnx86/spectre/bin/32bit/spectre: error while loading shared libraries: libelf.so.1: cannot open shared object file: No such file or directory"I don't know how to fix this problem. I probably made some mistakes at somewhere.Please give me some advise !!
# rpm -qa | grep elfutils
If elfutils is installed, add it to your library path, otherwise refer to this post: http://www.cadence.com/Community/forums/p/14360/24264.aspx#24264 (except search for the shared object you need)
In reply to tkhan:
Hi tkhan~thank you for your help!!
I have fixed the libelf.so.1 problem!!
But, there is another problem when I Exit CIW my terminal windows will show " libgcc_s.so.1 must be installed for pthread_cancel to work", is it ignorable ?
How can I fix this problem?
In reply to CCH01:
In reply to Andrew Beckett:
Hi Andrew~~thank you for your advice.
Your experience is very useful~~~
I can use the program normally now!!!
I'm trying to run Cadence 5.1.41 Analog environment on CentOS 5.5. I have got the following message error running spectre
/home/User/Cadence5.1.41/MMSIM7.11/tools.lnx86/spectre/bin/32bit/spectre: error while loading shared libraries: libelf.so.1: wrong ELF class: ELFCLASS64
Please, could you explain how to fix it?
In reply to pecola:
It's probably just picking up the 64 bit version of libelf.so.1 (which is in /usr/lib64) (maybe you have $LD_LIBRARY_PATH including that directory) but you'll need the 32 bit version of this library. On my machine:
UNIX> rpm -q -f /usr/lib/libelf.so.1elfutils-libelf-0.125-3.el5.i386
Note that CentOS 5.5 is not a supported distribution and so no testing has been done on it, and no patch data files are provided for it either.
Yes, you're right.
I fixed it!
I also have issue with "libelf.so.1"
"error while loading shared libraries: libelf.so.1: cannot open shared object file: No such file or directory"
I dont have "libelf.so.1 inside /usr/lib. Then I did what you have said:
# ~> rpm -qa | grep elfutils
Does this result means that I have it on my system. How should I add it on my library path? (I'm using SUSE by the way)
Kindly help me..