Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
Verification Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
The Cadence Academic Network helps build strong relationships between academia and industry, and promotes the proliferation of leading-edge technologies and methodologies at universities renowned for their engineering and design excellence.
Participate in CDNLive
A huge knowledge exchange platform for academia to network with industry. We are looking for academic speakers to talk about their research to the industry attendees at the Academic Track at CDNLive EMEA and Silicon Valley.
Come & Meet Us @ Events
A huge knowledge exchange platform for academia. We are looking for academic speakers to talk about their research to industry attendees.
Americas University Software Program
Join the 250+ qualified Americas member universities who have already incorporated Cadence EDA software into their classrooms and academic research projects.
EMEA University Software Program
In EMEA, Cadence works with EUROPRACTICE to ensure cost-effective availability of our extensive electronic design automation (EDA) tools for non-commercial activities.
Apply Now For Jobs
If you are a recent college graduate or a student looking for internship. Visit our exclusive job search page for interns and recent college graduate jobs.
Cadence is a Great Place to do great work
Learn more about our internship program and visit our careers page to do meaningful work and make a great impact.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
Overview All Courses Asia Pacific EMEANorth America
Instructor-led training [ILT] are live classes that are offered in our state-of-the-art classrooms at our worldwide training centers, at your site, or as a Virtual classroom.
Online Training is delivered over the web to let you proceed at your own pace, anytime and anywhere.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
I want to simulate the Noise figure for such a setup that first a band pass filter, then sample and hold, and then follower by amplifier, and ADC and so on.
Can i get the noise figure from source to each stage with Pnoise?
I understand that if the output is specified with voltage of two node but NOT specified by a port or probe, it won't exclude the noise from next stages in the NF calculation. So eventually, this is not the noise figure exactly upto such stage.
But how could I get the correct noise figure for each stage. And what i want to see is that the NF can be validated with just accumulate from one stage to the following. like NF04=NF01+NF12+NF23+NF34, where NF04 means NF from source to 4th stage.
Thanks a lot.
I don't know if this is an unusally question. But it should be common to ask what's the NF from stage two to stage three, isn't it?
The spectreRF manual suggest not use noise summary for Pnoise. Calculate by hand with result browse is not recommended as well. But there should be a simple way to get the NF from a non-port input to certain output node i guess.
Does any body have the same issue?
Or someone tell me this is not possible within cadence, so that i could move on.
Thanks in advance.
In reply to zcam:
If you have an urgent question, you should go to customer support. This forum is a community forum, and is answered by people (including the Cadence folks, like me) in their spare time. Personally I've been rather busy the last week and have had very little time to respond here.
Anyway, you'd probably need to isolate each stage from the next. That could be done with a voltage controlled voltage source (say) - this will allow you to measure the noise at the output of each stage (prior to the voltage controlled source) whilst still allowing the noise and signal to be transferred to the next stage. Of course, the problem with this is that you have an ideal buffer in place - and hence the intermediate outputs would not be seeing the load of the subsequent stage.
In reply to Andrew Beckett:
Thank for the quick reply.
You're right! add VCVS can isolate each stage. I will try that.
But as you said, load noise will be isolated as well.
In almost ideal unilateral case, this is not an issue. But not so accurate otherwise.
That promote me another related question:Can we turn the noise of part of the circuit off?
I know most modern device models have such feature by specifying "isnoisy=no". However, what if i want to turn off the noise of a group of devices (e.g. in a subckt). Do you have any suggestions?
In Eldo, it is supported! I guess spectre has the similar feature, isn't it?
I hope this could help more people than myself. :-)
Thanks a lot
On Simulation->Options->Analog you can turn off the Noise Contribution of particular blocks (on the "Main" tab, at the bottom).
I realized that the NF is not accurate with load noise turned off. Since the baseband noise is also neglected which shouldn't be.
Is there a way to specify where the load is using the similar way as specify a probe? Equivalently, can some subckt be treat as a whole probe?