Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Im trying to create a skill script that will look at the ADEXL HPO options to calculate the required tokens. Ive been able to read the options on the HPO panel but need some help with the rest. Heres the beginning of the code:
;; defining the PreRun function(define (PreRun session_name sdb_highandle mode_string test_name) (printf "Launching a new run %L %L %L %L\n" session_name sdb_highandle mode_string test_name)
tests=axlGetTests(sdb_highandle) jobPolicyName=axlGetAttachedJobPolicy()->name distmethod=axlGetAttachedJobPolicy()->distributionmethod ;; traversing all the tests and changing the mt option as per the requirement foreach( test_name cadr(tests) if( axlGetEnabled(axlGetTest(sdb_highandle test_name)) then printf("test %s is enabled\n" test_name) testSession=axlGetToolSession(session_name test_name) println( "check MT options") mt_opt=testSession~>simID~>data~>env~>data~>turboOpts~>data~>mtOption~>value if(eq(strcmp(mt_opt "Manual") 0) printf(" Manual MT will be disabled!!! \n")) if(eq(strcmp(mt_opt "Disable") 0) printf("Disabled MT \n")) if(eq(strcmp(mt_opt "Auto") 0) printf(" Auto MT will be disabled!!! \n")) if(eq(strcmp(distmethod "Local") 0) then printf(" Turning off the MT options for this test \n") testSession~>simID~>data~>env~>data~>turboOpts~>data~>mtOption~>value="Disable" ) println( "check tool options") tool_opt=testSession~>simID~>data~>env~>data~>turboOpts~>data~>uniMode~>value if(eq(strcmp(tool_opt "Spectre") 0) printf(" This is a Spectre run \n")) if(eq(strcmp(tool_opt "Turbo") 0) printf(" This is a Turbo run \n")) if(eq(strcmp(tool_opt "APS") 0) printf(" This is an APS run \n")) println( "check parasitic reduction option") paraRed_opt=testSession~>simID~>data~>env~>data~>turboOpts~>data~>psrSwitch~>value if(eq(strcmp(paraRed_opt t ) 0) printf(" parasitic reduction enabled \n")) if(eq(strcmp(paraRed_opt nil ) 0) printf(" parasitic reduction disabled \n")
The first issue is that paraRed_opt is either a nil or t so strcmp wont work, is a simular command for t/nil ?
Once I have the options gathered, I can use a series of if/thens but is there a more elegant way to handle this like with a truth table or increment command?
Several things wrong with this code.
In reply to Andrew Beckett:
>6) I don't know what you mean by "increment command"
As mentioned, I need to calculate the required token count so this can be implemented in a number of of ways one of which would be a table for each options:
reset the token count to 0
if APS then increment then token count +2
if parasitic reducution then increment then token count +2
this would give a token total of 4
Hope that helps
In reply to ejm20:
It's probably simplest to implement that as a set of when statements:
tokenCount=0when(APS tokenCount=tokenCount+2)when(paraRed tokenCount=tokenCount+2)
Or you might just want to run spectre to find out the number of tokens - spectre +query input.scs will tell you how many. It would have to have all the same command line arguments as would get passed to spectre, so it may not be that easy to implement.
That way you've not hardcoded some dependency which may change in different releases.
unfortunately, the +query and +lreport option does not allow the job run, I have filed an enhancement request to also allow the job to run. I need the token count for the NC job scheduler so it knows how many tokens are required for the job. ADE works great but ADEXL has very different files systtem.
We're running IC6.14 and the commands that you suggested are not recognized. Did I miss something?
*Error* eval: undefined function - asiGetHighPerformanceOptionVal
*Error* toplevel: undefined variable - asiGetHighPerformanceOptionVal
They were added in IC614 ISR7 (184.108.40.2060.7). Use:
asiEnvGetVal(asiSession "turboOpts" "mtOption")
there's also asiEnvSetVal(session partition prop value)
The variable in your case is called asiSess, not asiSession. That's why it fails.
In reply to Riad KACED:
It's not documented. I was suggesting it because it's better than accessing the internal data structures; better still, use the asiGetHighPerformanceOptionVal function which is public and documented (certainly in IC615, but it's available in IC614 ISR10 too). In general there should be a public specific function to get the right "OptionVal" - asiEnvGetVal was just the fallback because that was missing in this case, until the public function got added in IC614 ISR7.
Good to hear from you! Hope things are going OK now you're in the US.
thanks for your prompt reply ! Doing pretty good in the US, thanks :-)
I pretty much got the routine working but I need to add a safeguard. Im creating the file at the end of the routine with this:
myPort = outfile( "runSimulation" ) fprintf(myPort "%s %s %s\n" tool multiThread paraReduction_opt ) close(myPort)
I need to add some code at the beginning to see if the file exists and delete if it does. What is the syntax to do this?
You can give an additional argument to the outfile function which is the mode, though the default mode is "w" for write or over-write which is what you would want I think, so I'm not quite sure why you need this (or why you think you might need it). However, to answer your question more directly, you may do something like the following:
Hopefully this will answer your question.