Stats

  • Locked Locked
  • Replies 11
  • Subscribers 143
  • Views 19011
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Simulation using SKILL

deepshah

 hi,

I am simulating a circuit block with SKILL

I wrote Desvar.il, mystimuli.scs, Simsetup.il but i do not know how to proceed with main simulation body can anybody help me?

i want power data to be displayed 

Thanks

 

Parents

  •  hi,

    Thanks all finally i am able to simulate with the script.

    Now i am facing another problem and that is when i simulate the design it takes 1ps tran steps so it is very slow and i tried all the option it reads like this..  My clock is 50MHz.My input frequency is slower than clock

    Important parameter values:
        start = 0 s
        outputstart = 0 s
        stop = 100 ns
        step = 1 ns             it takes these two automatically (step and maxstep) i gave it step=5 ns and maxstep=10 ns
        maxstep = 1.6ns
        ic = all
        skipdc = no
        reltol = 100e-06
        abstol(V) = 1 uV
        abstol(I) = 1 pA
        temp = 27 C
        tnom = 27 C
        tempeffects = all
        errpreset = conservative
        method = gear2only
        lteratio = 10
        relref = alllocal
        cmin = 0 F
        gmin = 1 pS

     Deep

     

Reply

  •  hi,

    Thanks all finally i am able to simulate with the script.

    Now i am facing another problem and that is when i simulate the design it takes 1ps tran steps so it is very slow and i tried all the option it reads like this..  My clock is 50MHz.My input frequency is slower than clock

    Important parameter values:
        start = 0 s
        outputstart = 0 s
        stop = 100 ns
        step = 1 ns             it takes these two automatically (step and maxstep) i gave it step=5 ns and maxstep=10 ns
        maxstep = 1.6ns
        ic = all
        skipdc = no
        reltol = 100e-06
        abstol(V) = 1 uV
        abstol(I) = 1 pA
        temp = 27 C
        tnom = 27 C
        tempeffects = all
        errpreset = conservative
        method = gear2only
        lteratio = 10
        relref = alllocal
        cmin = 0 F
        gmin = 1 pS

     Deep

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.