• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC SKILL
  3. Re: SPAM Re: Config View Creation

Stats

  • Locked Locked
  • Replies 1
  • Subscribers 143
  • Views 13243
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Re: SPAM Re: Config View Creation

mobileee
mobileee over 16 years ago
Hi Andrew,
 
I am giving the code below.
 
################### SKILL CODE starts HERE ###################
 
ddUpdateLibList()
if(ddGetObj("myLib" "cell1" "symbol")
 then ddDeleteLocal(ddGetObj("myLib" "cell1" "symbol" ""))
 else printf("no symbol"))
;if(ddGetObj("myLib1" "cell3" "symbol")
; then ddDeleteLocal(ddGetObj("myLib1" "cell3" "symbol" ""))
; else printf("no symbol"))
if(ddGetObj("myLib" "cell2" "schematic")
 then ddDeleteLocal(ddGetObj("myLib" "cell2" "schematic" ""))
 else printf("no schematic"))
editor = "touch"
schViewToView("myLib" "cell1" "myLib" "cell1" "veriloga" "symbol" "ahdlToPinList" "schPinListToSymbol")
;schViewToView("myLib" "deb_pal" "myLib" "deb_pal" "veriloga" "symbol" "ahdlToPinList" "schPinListToSymbol")
ddUpdateLibList()
let( (i x y u v d_cellview d_master d_inst wireSpace wireWidth wireLength instTermBbox instTermBboxInCv instTermLLX instTermLLY instTermURX instTermURY          wireOriginX wireOriginY deltaX deltaY wireLabel wireOrientation wireJustification wireEndX wireEndY termWire)
declare(a[1110])
i=0
x=0.0
y=1.5
u=2
v=0
wireSpace=0.0625
wireWidth=0
wireLength=0.6
ddUpdateLibList()
editor = "touch"
d_cellview = dbOpenCellViewByType("myLib" "cell2" "schematic" "schematic" "w")
d_master1 = dbOpenCellViewByType("myLib" "cell1" "symbol" "schematicSymbol" "r")
d_master2 = dbOpenCellViewByType("myLib1" "cell3" "symbol" "schematicSymbol" "r")
schCreateInst(d_cellview d_master1 nil  x:y "R0")
schCreateInst(d_cellview d_master2 nil  u:v "R0")
foreach( inst d_cellview~>instances
   printf( "Instance : %s\n" inst~>name)
   foreach( instTerm inst~>instTerms
      instTermBbox = car(instTerm~>term~>pins~>fig~>bBox)
   instTermBboxInCv = dbTransformBBox(instTermBbox
                      inst~>transform)
   printf(" Instance Terminal = %s : absBbox = %L :
            relBbox=%L\n" instTerm~>name
   instTermBbox instTermBboxInCv)
   instTermLLX=xCoord(lowerLeft(instTermBboxInCv))
   instTermLLY=yCoord(lowerLeft(instTermBboxInCv))
   instTermURX=xCoord(upperRight(instTermBboxInCv))
   instTermURY=yCoord(upperRight(instTermBboxInCv))
   wireOriginX=(instTermLLX+instTermURX)/2
   if( (instTerm~>name == "CL<2:0>" || instTerm~>name == "tmin<3:0>" || instTerm~>name == "dsp<1:0>" || instTerm~>name == "bias_rdy" || instTerm~>name == "buck_en" || instTerm~>name == "forcePWM" || instTerm~>name == "ss_speedup_mask" || instTerm~>name == "tsd_n" || instTerm~>name == "uvlo_in" || instTerm~>name == "testos" || instTerm~>name == "tm" || instTerm~>name == "buck_rdy" || instTerm~>name == "clk" || instTerm~>name == "PVDD" || instTerm~>name == "PGND") then
    a[i] = wireOriginX
    i++
    wireOriginY=(instTermLLY+instTermURY)/2
    a[i] = wireOriginY
    i++
   )
   case((instTerm~>name)
    ("CL<2:0>"
    deltaX=0
    deltaY=wireLength
    wireLabel="CL<2:0>"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
      ("tmin<3:0>"
    deltaX=0
    deltaY=wireLength
    wireLabel="Tmin<3:0>"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
      ("dsp<1:0>"
    deltaX=0
    deltaY=wireLength
    wireLabel="dsp<1:0>"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
      ("bias_rdy"
    deltaX=0
    deltaY=wireLength
    wireLabel="bias_rdy"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
     ("buck_en"
    deltaX=0
    deltaY=wireLength
    wireLabel="buck_en"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("forcePWM"
    deltaX=0
    deltaY=wireLength
    wireLabel="forcePWM"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("ss_speedup_mask"
    deltaX=0
    deltaY=wireLength
    wireLabel="ss_speedup_mask"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("tsd_n"
    deltaX=0
    deltaY=wireLength
    wireLabel="tsd_n"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("uvlo_in"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("testos"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("tm"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("PGND"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("buck_rdy"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("clk"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )
        ("PVDD"
    deltaX=0
    deltaY=wireLength
    wireLabel="uvlo_in"
    wireOrientation="R0"
    wireJustification="lowerRight"
  )

  (t
    printf("Unknown Terminal !!!! \n")
    )
  )
   )
   )
termWire=schCreateWire(d_cellview "draw" "full" list(a[0]:a[1] a[30]:a[31]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[2]:a[3] a[32]:a[33]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[4]:a[5] a[34]:a[35]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[6]:a[7] a[36]:a[37]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[8]:a[9] a[38]:a[39]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[10]:a[11] a[40]:a[41]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[12]:a[13] a[42]:a[43]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[14]:a[15] a[44]:a[45]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[16]:a[17] a[46]:a[47]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[18]:a[19] a[48]:a[49]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[20]:a[21] a[50]:a[51]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[22]:a[23] a[52]:a[53]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[24]:a[25] a[54]:a[55]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[26]:a[27] a[56]:a[57]) wireSpace wireSpace wireWidth)
termWire=schCreateWire(d_cellview "draw" "full" list(a[28]:a[29] a[58]:a[59]) wireSpace wireSpace wireWidth)
schCheck(d_cellview)
getWarn()
dbSave(d_cellview)
dbClose(d_cellview)
deNew('(nil ?libname "myLib" ?cellname "cell2" ?viewName "schematic" ?viewType "config"))
hiiSetCurrentForm('deNewForm)
deNewForm->deToolName->value = "Hierarchy-Editor"
hiFormDone(deNewForm)
 
 
 
################### SKILL CODE ends HERE ####################
 
 
In the above code symbol of the cell3 has about 40 pins including those mentioned in the case statements. In the symbol of cell1 contains only those pins mentioned in case statement. I want to connect the pin say "buck_en" of symbol of cell1 with buck_en of symbol cell3. But the above code generates the schematic where the "buck_en" of symbol of cell1 is getting connected with some other pins of symbol of cell3 but not getting connected with "buck_en". That's the problem. Also I am not able to add label to the created wire.
 
Hope now you have got a clear idea what I am trying to do. Please suggest a suitable solution of the above problem.
  • Cancel
  • Andrew Beckett
    Andrew Beckett over 16 years ago

    Rather than answer this twice (I hate double posting), I've replied to this on https://www.cadence.com/Community/forums/p/12616/18072.aspx#18072

    So best to stick with just one thread going forward to avoid confusion.

    Regards,

    Andrew.

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information