Stats

  • Locked Locked
  • Replies 8
  • Subscribers 143
  • Views 18704
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

A question about setting grid controls...?

IC Layout
Hi! I have a small question about setting grid controls in layout editor... I would like to set grid value 10nm... Are the below lines can set grid for 10nm minor spacing = 0.01 major spacing = 0.01 X Snap Spacing = 0.005 Y Snap Spacing = 0.005 or shall I need to fill above four fields with 0.01 Which will essentially decides the grid value for the layout editor... Thanks in Advance... Prabhakar. K -- Layout Engineer
Parents
  • Hi,

    A question about skill for grid control

    like i want to have 3 set of grid control.

     1. default minimum from pdk (i.e. 0.005grid).

          minor spacing = 0.005

          major spacing = 0.005

          x snap spacing = 0.005

          y snap spacing = 0.005

    2. Next set is 0.1 setup for all.

    3. last is to have 0.2 for all.

    How can i set them into the skill for me to assign a bindkey to 3 of them instead of keep changing the grid controls?

    Anyone got sample of it? Honestly, dont know about skill writing.

    Thank you very much.

     

    Regards,

    henry
Reply
  • Hi,

    A question about skill for grid control

    like i want to have 3 set of grid control.

     1. default minimum from pdk (i.e. 0.005grid).

          minor spacing = 0.005

          major spacing = 0.005

          x snap spacing = 0.005

          y snap spacing = 0.005

    2. Next set is 0.1 setup for all.

    3. last is to have 0.2 for all.

    How can i set them into the skill for me to assign a bindkey to 3 of them instead of keep changing the grid controls?

    Anyone got sample of it? Honestly, dont know about skill writing.

    Thank you very much.

     

    Regards,

    henry
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.