Stats

  • Locked Locked
  • Replies 5
  • Subscribers 144
  • Views 16380
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SKILL to create BUS

avinash1skill

Hi Everyone,

i need script to create bus, like to create 'n' no. of paths with 'x' width & 'y' spacing between them.

Thanks in advance.

avinash

Parents
  • Hi Avinash,

    Another way to do this is with a MultiPart Path (MPP). You can
    create one interactively using the Create -> Multipart path menu
    then press F3 to make sure that the options form is visible.
    You define the "master path" and then the others would be offset
    subpaths that you add the details for using the "Subpart" button
    on the main "Create Multipart Path" form.

    You can test the path interactively and modify it until you get
    it right. Once you are happy with it, you can save this to a
    template so that you don't have to repeat all the work again.

    The MPP can be created through SKILL using a call to the
    rodCreatePath() function. If you saved the interactive MPP
    to an ASCII file, you can re-use much of this structure to
    build the arguments to the rodCreatePath() function.


    I'm sure that there are solutions on this...

    Regards,

    Lawrence.
Reply
  • Hi Avinash,

    Another way to do this is with a MultiPart Path (MPP). You can
    create one interactively using the Create -> Multipart path menu
    then press F3 to make sure that the options form is visible.
    You define the "master path" and then the others would be offset
    subpaths that you add the details for using the "Subpart" button
    on the main "Create Multipart Path" form.

    You can test the path interactively and modify it until you get
    it right. Once you are happy with it, you can save this to a
    template so that you don't have to repeat all the work again.

    The MPP can be created through SKILL using a call to the
    rodCreatePath() function. If you saved the interactive MPP
    to an ASCII file, you can re-use much of this structure to
    build the arguments to the rodCreatePath() function.


    I'm sure that there are solutions on this...

    Regards,

    Lawrence.
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.