Stats

  • Locked Locked
  • Replies 9
  • Subscribers 144
  • Views 14968
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

i use paramAnalysis and how to get the output?

imagesensor123

 Hi ,

    I use paramAnalysis in my ocean to do a parametric analysis, and now i want to get the output of every sweep value at the certain time . for example, i used the paramAnalysis( "lin" ?start 10u ?stop 50u ?step 10u) to do a transient simulation for 100us , now how can i get the vout value for lin=10 time=50us and lin=20u time=50u ,and so on.In addition , i found that the command "value" can get the signal value at the specified time,like value(v("vout") 50u), but how can i get the value "vout lin=20 time=50us" ? thanks

Regrads,

zfeng

Parents

  • Spectre isr 10.1.1.056.isr5

    ICFB 5.10.41.500.6.147

    NOTE:  If you read that post earlier which confused you, you’ll see the word ‘case’ has  a capital C.  No such variable exists in my testbench, but it does print correctly to the the file. Just doesn’t changes anything because the variable ‘Case’ doesn’t exist.  ‘case’ however does (with a lower case c).

    Lotta ‘cases’ flying around!

    I take it I need to log this formally?  I’ll probably need to go through our CAD group for this.

Reply

  • Spectre isr 10.1.1.056.isr5

    ICFB 5.10.41.500.6.147

    NOTE:  If you read that post earlier which confused you, you’ll see the word ‘case’ has  a capital C.  No such variable exists in my testbench, but it does print correctly to the the file. Just doesn’t changes anything because the variable ‘Case’ doesn’t exist.  ‘case’ however does (with a lower case c).

    Lotta ‘cases’ flying around!

    I take it I need to log this formally?  I’ll probably need to go through our CAD group for this.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.