• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC SKILL
  3. command "sevRun" or "sevRunEngine"

Stats

  • Locked Locked
  • Replies 15
  • Subscribers 144
  • Views 5885
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

command "sevRun" or "sevRunEngine"

imagesensor123
imagesensor123 over 14 years ago

 Hi,

    i know that if you start analogArtist from schematic composer, the current schematic will be loaded as the current design in analogArtist, and I noticed that the analog-Artist use the command "sevRun" or "serRunEngine" to start a simulation,  and i am trying my own simulation method, like the "paramAnalysis", but  i found that when i put the sevRunEngine in my own procedure, it always prompts that "Need to select design before issuing this command" in CIW, and then i used the command "sevChooseDesign()", but this can't work well either. so here i want to make sure two points:

 1,  how to apply sevRun or sevRunEngine correctly, what's the necessary condition, such as a design?

 2,  for one thousand(this is a random value which depend on the input matrix) times parameter simulation, especially for only one parameter, what is the best way? i intend to use a loop in skill function "myOwnSim()", and in this function, i can calculate some equations. i think this way is more convenient than paramAnalysis

 welcome to any discussions,

Regards,

zfeng

  • Cancel
Parents
  • tyanata
    tyanata over 14 years ago

     Hello,

    I have similar problem as zfeng.

    I want to create custom button on ADE which runs simulation with option +query=tokenlic. Using this option simulation stops after netlisting and in the log file is outputed the number of the token licenses.

    As we disussed in the topic for ADE buttons creation, I already scceeded to create custom button on the ADE main menu. But when try to realize simulation run, face same problem as zfen. If I copy the callback function from original file spectre.menus for the "Simulatiin"->"Run"and paste in my custom spectre.menus file as callback function in my custom buttons the response is as zfeng noted that first design has to be selsected. But if I copy the entire "Run" submenu button from "Simulation" menu, to be submenu in my custom menu, now when I type the newly created button "Run" simulation runs normally. But now I want to rename this button and to change callback function so that the simulation to be run with mentioned above option +query=tokenlic ( in GUI ADE the path of this option is "Setup"->"Environment"->"userCmdLineOption"), and after that some text file search function has to be implemented in the callback function, in the end the final output there must be the number of token licenses.

    Best regards,

    tyanata

     

     

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Reply
  • tyanata
    tyanata over 14 years ago

     Hello,

    I have similar problem as zfeng.

    I want to create custom button on ADE which runs simulation with option +query=tokenlic. Using this option simulation stops after netlisting and in the log file is outputed the number of the token licenses.

    As we disussed in the topic for ADE buttons creation, I already scceeded to create custom button on the ADE main menu. But when try to realize simulation run, face same problem as zfen. If I copy the callback function from original file spectre.menus for the "Simulatiin"->"Run"and paste in my custom spectre.menus file as callback function in my custom buttons the response is as zfeng noted that first design has to be selsected. But if I copy the entire "Run" submenu button from "Simulation" menu, to be submenu in my custom menu, now when I type the newly created button "Run" simulation runs normally. But now I want to rename this button and to change callback function so that the simulation to be run with mentioned above option +query=tokenlic ( in GUI ADE the path of this option is "Setup"->"Environment"->"userCmdLineOption"), and after that some text file search function has to be implemented in the callback function, in the end the final output there must be the number of token licenses.

    Best regards,

    tyanata

     

     

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information