Stats

  • Locked Locked
  • Replies 4
  • Subscribers 142
  • Views 13936
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

partial selection turned off while descending

Aritra

 Hi,

    Is there any way to turn on the partical selection while descending ? Every timy I descend to the below hierarchy, it gets turned off. 

Also how to keep filter size as 0  while descending ?

 

Please help.

Parents

  • It reinitializes it each time. So it may be set via cdsenv:

    envSetVal("layout" "partialSelect" 'boolean t)
    envSetVal("layout" "filterSize" 'float 0.0)

    but you also need to see if either are set as properties on the library or technology library (go over the library in the library manager, do RMB-> Properties, and look for viewProps and hit the EXPAND button if there is one. Do the same for maskLayout within the resulting form, and then you might find filterSize  and potentially partialSelect. It's also possible that these are set as cellView properties (do File->Properties with the cellView open to check, and look on the properties page).

    Regards,

    Andrew.

Reply

  • It reinitializes it each time. So it may be set via cdsenv:

    envSetVal("layout" "partialSelect" 'boolean t)
    envSetVal("layout" "filterSize" 'float 0.0)

    but you also need to see if either are set as properties on the library or technology library (go over the library in the library manager, do RMB-> Properties, and look for viewProps and hit the EXPAND button if there is one. Do the same for maskLayout within the resulting form, and then you might find filterSize  and potentially partialSelect. It's also possible that these are set as cellView properties (do File->Properties with the cellView open to check, and look on the properties page).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.